Minerals & Metallurgy Projects

1. raw materials lump granule and powder shape from Henan China manufacturer
2. the other one is ultra-low nitroge, reduce impurity.

powder metallurgy (PM) is a term covering a wide range of ways in which materials or components are made from metal powders.

Carbon 98.5% Metallurgy Graphite Carburant
1.High carbon 99%min,
2.Low Sulphur Content
3.Delivery on time
4.Nitrogen content: ≤0.30

owder metallurgy (PM) is a term covering a wide range of ways in which materials or components are made from metal powders.

1.Controlled composition &size
2.Delivery Detail:25-35 days
3.small sample quantity is OK
4.manufacturer supply with better service

powder forming,sintering and steam treatment,special anti rust oil.hardness can reach 35,Salt spray test 24h.

1.Controlled composition &size
2.Delivery Detail:25-35 days
3.small sample quantity is OK
4.manufacturer supply with better service

1.High spherical degree
2.Less impurity content
3.High tap density
4.Epigranular
5.Inspection: CIQ SGS...

1. FC: 98.5% Min
2. Ash: 0.8% Max
3. V. M.: 0.7% Max
4. S: 0.1-0.5% Max
5. Moisture: 0.5% Max...

1. two kinds, one is common carburant for ladle furnaces, less dust
and yield higher .
2. the other one is ultra-low nitroge, reduce impurity.

1. anti-erosion and anti-premeate of steel slag
2. made of lvshi, magnesia and spinel
3. refractoreness and knocking is good
4. good anti-strip

1.High spherical degree
2.Less impurity content
3.High tap density
4.Epigranular
5.Inspection: CIQ SGS...

1.High spherical degree
2.Less impurity content
3.High tap density
4.Epigranular
5.Inspection: CIQ SGS...

1.Controlled composition &size
2.Delivery Detail:25-35 days
3.small sample quantity is OK
4.manufacturer supply with better service

1.have high refractoriness.
2.good liquidity.
3.high temperature to cast performance.
4. Especially for all kinds of ladle refining

1.High spherical degree
2.Less impurity content
3.High tap density
4.Epigranular
5.Inspection: CIQ SGS...

1.High spherical degree
2.Less impurity content
3.High tap density
4.Epigranular
5.Inspection: CIQ SGS...

1.High spherical degree
2.Less impurity content
3.High tap density
4.Epigranular
5.Inspection: CIQ SGS...

1.use for electric furnace to steel-making
2.steel water don't permeate
3.high refractoriness
4.safety and easy to operate

1.Strong deoxidization ability,liquidity is good, no dust
2.Increase carbon and silicon for steel making
3.Can reduce the dosage of ferrosilicon.