bellows

1.Forming method: Hydraulic forming
2.shape: U
3. operating temperature : -60 ℃ -+100℃
4, WAVES : 11
5 .Wall thickness : 0.18mm

Equivalent to John crane type 21,Rubber bellow seal.AES P04 SEALS. Our general-purpose seal has become the industry standard for OEM designers

1.Forming method: Hydraulic forming
2.shape: U
3. operating temperature : -194℃ -+400℃
4, WAVES : 12
5 .Wall thickness : 0.16m

1.Forming method: Hydraulic forming
2.shape: U
3. operating temperature : -60 ℃ -+100℃

1.Forming method: Hydraulic forming
2.shape: U
3. operating temperature : -194℃ -+400℃
4, WAVES : 7
5 .Wall thickness : 0.12mm

Book mounted seats to suit a veriety of different housings and working length standards ring. Inch size. enquivolent to sterling 152 seal.

1.Forming method: Hydraulic forming
2.shape: U
3. operating temperature : -194℃ -+400℃
4, WAVES : 10
5 .Wall thickness : 0.12m

Water Pump Seals. Coolant pump seal primarily utilised in combustion engine water pumps. Equivolent to john crane type 6A seal.

1.Forming method: Hydraulic forming
2.shape: U
3. operating temperature : -60 ℃ -+100℃
4, WAVES : 7
5 .Wall thickness : 0.15mm

single seals, Unbalanced,
This mechanical seal is one of the most commonly used for corrosion resistant pumps. Equivalent to Jhon crane type10T

1.Forming method: Hydraulic forming
2. operating temperature : -194℃ -+400℃
3, We are capable of customized special design for clients

This seal is commonly used for oil, water and other weak corrosive medium .Good quality, long life, reasonable price

1A metallic bellows is made from a thin seamless tube
2. operating temperature : -194℃ -+400℃
3. WAVES : 15
4.Wall thickness

used for s CR pump.. CR / CRI / CRN Series Vertical Multistage Centrifugal Pumps. Pump Models CR2, SEAL KIT CR10-2

the tolerance to 0.02
staright seamless tubes
application: pressure gauge
materila is 316L

1.Forming method: Hydraulic forming
2.shape: U
3. operating temperature : -60 ℃ -+100℃
4, WAVES : 6
5 .Wall thickness : 0.15mm

Wave spring seals. Elastomer diaphtagm seals with very short working lenght. dimenstions to suit upper seal chamber in certain A.B.S. AF pumps.

1.Forming method: Hydraulic forming
2.shape: U
3. operating temperature : -194℃ -+400℃
4, WAVES : 10
5 .Wall thickness : 0.5m

1.Forming method: Hydraulic forming
2.shape: U
3. operating temperature : -194℃ -+400℃
4, WAVES : 4
5 .Wall thickness : 0.12mm

GW1B mechanical seal, for blower pump, diving pump, circulating pump, replace the mechanical seal of John Crane 1B. Single seals.

1.Forming method: Hydraulic forming
2.shape: U
3. operating temperature : -194℃ -+400℃
4, WAVES : 10
5 .Wall thickness : 0.12m

rubber bellow seals.

1.Forming method: Hydraulic forming
2.shape: U
3. operating temperature : -194℃ -+400℃
4, WAVES : 6
5 .Wall thickness : 0.17mm

1,Single seal
2,Loosely inserted seal face provides self-adjusting capability
3,In-house manufactured sliding parts. equivalent to P02 SEALS.

1, size : 24x16x18
2, types of joints : WDX type
3, Material: copper
4.Thickness:0.1mm-0.3mm

GW301 replace brugmann BT-AR SEAL.
small seal for large pump series", a mechanical seal for mass produced water pumps.

material :316L
the bellows are used for pressure controller and temperature controller

FBD series pump seal. Single seal .Ualanced .

1.Forming method: Hydraulic forming
2.shape: U
3. operating temperature : -194℃ -+400℃
4, WAVES : 12
5 .Wall thickness : 0.12mm

1.Forming method: Hydraulic forming
2.shape: U
3. operating temperature : -194℃ -+400℃
4, WAVES : 10
5 .Wall thickness : 0.12mm