directional solenoid valve

solenoid valve is the interface between electronic controllers and pneumatic systems.

Solenoid Valve
Model:H-VD01-12

Medium:Air,Water, Oil
Temp:-5-80℃
Pressure:0-0.8MPa
Material:Brass\aluminum
Size: G1/4"...

Condition:Normal Close
Joint Size:M5
Orifice:1.2mm
Working Pressure:0.15-0.8Mpa
Working Temperature:-5-80...

We are china leading manufacturer of 4V320-08 Solenoid Valve, it is Two-Position Five Way type solenoid valve and works well under 0.15--0.8Mpa.

Model AZ-FP15
Action way Pilot type
Type NC self-holding (at impulse voltage) pulse type
Working pressure 0.02MPa-0.8MPa

Explosion proof
DN3-250mm
Body material: SS304,nodular cast iron, special(WCB,SS316)
Voltage can be customized

three kinds of seal are available for you
brass,SS316 material

Condition:Normal Close/Normal Open
Joint Size:1/8" 1/4"
Orifice:2\3\4\5mm
Working Pressure:0.15-0.8Mpa
Working Temperature:-5-80...

Model:MCF25DD MCF45DD
Working Pressure: 0.4-0.6Mpa
Working Medium: Clean Air
Voltage: 12VDC, 24VDC, 110VAC, 220VAC
Currently: 0.8 A, 0.23

We are leading exporter of 2W160-10 Pneumatic brass valve. It's 2/2 way valve with brass body used in water, oil application.

We are China main exporter of 2W350-35 pneumatic water control valve in China. It's 2/2 way valve with brass body used in water, oil application

We are main seller of 2W400-40 Brass water valve in China. It's 2/2 way valve with brass body used in water, oil application.

We are China leading manufacturer of 2W160-15 Pneumatic Solenoid Valve. It's 2/2 way valve with brass body used in water, oil application.

We are leading producer and exporter of 4V230-06 pneumatic air Solenoid Valve.

We are main manufacturer of three position five way electronic solenoid valves like 4V230P-08 air solenoid valve.

We are leading producer and exporter of 4V220-06 pneumatic air Solenoid Valve.

Explosion isolation solenoid unloading valve
Specification : 03 06 10
working pressure(Mpa):5 10 20 31.5

2 way SUS 304 Water Weak Acid and Alkali Solenoid Valve
Fast Open Solenoid Valve Direct Acting Stainless Steel Valve

1).Big variable control piston return spring strong, fast response.
2).100% Nominal torque shaft drive structure

1). weight 90KG.
2). China Innovative company.
3). Shanghai Innovative compan.

1). Motion pattern: Inner Guide type.
2). Wiring Form: Lead wire type or connector type.

1). Type: normal colse ,normal open.
2). Weight: 90KG.
3). Sealing materials: NBR ,VITON.
4). Form: plug and wire lead type.

Teflon solenoid valve, two-position two-way, normal close.
Valve body material: teflon, can be use for strong acid,alkali,ect
Good quality,fast del

Plastic solenoid valve
suit for water,gas,liquid
body material is reinforced nylon
solenoid valve 1.ISO 9001:2000, CE approved

1.ISO 9000 Certified
2.CE Tested
3.2 Years Manufacturers Warranty
4.Fully automatic - No maintenance
5.Manual test switch :mirco switch

1-) High Quality
2-) ISO/OEM/ODM/CE
3-) Label Service
4-) 20 Year Experience
5-) Custom Design Supported

1-) High Quality
2-) ISO/OEM/ODM/CE
3-) Label Service
4-) 20 Year Experience
5-) Custom Design Supported

1-) High Quality
2-) ISO/OEM/ODM/CE
3-) Label Service
4-) 20 Year Experience
5-) Custom Design Supported

Diaphragm Valves are usually used polluted, dirty, abrasive or high viscosity fluids.