drain valve

drain valve
Applying to high&low pressure
Heat elimination structure

Valve,Drain,Pipe Joint,Strainer,Tap,Valve Fittings,Valve Accessories

Suitable medium: Water, steam
Pressure: 900lbs;1500lbs; 2500lbs;PN160-PN420
MATERIAL: A105,F11, F22,F91,WB36
Size: 1/2" - 4",DN15-DN100

pipeline drain valve
Applying to high&low pressure
Heat elimination structure

Brass Drain Valve
1 Body: Brass
2 Technic: Forging or casting
3 Certificate: ISO and CE
4 Packing: Neuture packing

Automatic drain valve, stainless steel ball, -20 to 80c, 0-16bar, use for air compressor. working type :leverage and buoyancy type ,media: water

Min. Order:500 pcs;Packing:carton box;Transportation:by sea or air;PaymentType:T/T,L/C;Trademark:sorl;PatentRight:TS16949;ExpRegion:all over the worl

High intensity,long service life;Contian no metal,burglarproof and never rust;Light weight,easy to handle;Elegant appearance,color can suit to environ

Drain Valve
HV-DV07
Original No: EE4106
Ports: 1=M22x1.5 Male 4=M12x1.5(6L)
Application:Sino truck, Benz.

971 BRONZE TEST&DRAIN VALVE
SIZE:DN50
PRESSURE RATING:PN25
WORKING TEMPERATURE:T<=170
WORKING MEDIUM:WATER,OIL,STEAM...

FLOAT VALVE REGULATES FLUID LEVEL BY USING A FLOAT TO DRIVE AN INLET VALVE SO THAT A HIGHER FLUID LEVEL WILL FORCE THE VALVE CLOSED WHILE A LOWER FLUI

AD402 series Auto Drain Valves are equivalent to SMC,easy to maintain and operate, long service of life.

Electonic drain valve
Port Size:1/4''-1/2'' Female Thread
With OPT Electric Timer

1.2 way direct acting,Normally Closed
2.Port size: 1/4", 3/8",1/2"
3.Working pressure range: 0-1.0Mpa, 0-1.6Mpa, 0-4.0Mpa

material:pp

• 3/4" Hose Thread Outlet
• Pipe Thread Comply with ANSI B1.20.1
• Hose Thread Comply with ANSI B1.20.7
• Solder Ends Comply with

1. Drain valve, use for air compressor,air compressor,Electronic timing type drain valve
2.Port Size: 1/4"3/8"1/2"
3.OFF:0.5-45min;ON:0.5-1

Zdlsy type electric trap is the company according to the steam power plant equipment and a professional development design production .

We can cast and machine different kinds of products according to the drawings or samples customers supply.

solenoid drain valve,Conforming to CE standard,Full automatic without the need of maintenance.Orifice: 3.5mm,Valve body: brass,Working pressure 16Bar

5"x15000psi Sleeve type drain valve is used to drain the volume fluid and release pressure for drill stem testing operation when string testing finish

duckbilled type of drain valve
Applying to high&low pressure
Heat elimination structure

Drain Valve (1/2"NPT)
HV-DV01
Original No:934 300 016 0
1.Drain valve (Type A)
2.material:brass or Steel with Zinc coating...

• Sizes Range - 1/2"MIP(1/2"SWEAT) x 3/4"MHT
3/4"MIP(1/2"FIP) x 3/4"MHT, 3/4"MIP X 3/4"MHT
• Pipe threads comply with ANSI B1.20.1

Easy to use, new materials, corrosion resistance, durability.
Drainage effect is obvious, can be a very quick drainage.

2/2 Solenoid valve with timer direct acting ,valve body :brass ,Seal:Viton,voltage: 24~220VAC/DC,working pressure:0-16BAR,low cost for ecnomical choci

The Full Bore Drain Valve including two types: Needle type and sleeve type, made of Inconel to be used in cased holes for full H2S drill stem testing.

Electonic drain valve
Port Size:1/4''-1/2'' Female Thread
With OPT Electric Timer

ZMQSY series pneumatic diaphragm type Y valve is the company according to the equipment of thermal power plant .

Drain Valve
HV-DV01 Original No:934 300 001 0
Max. operating pressure: 20 bar
Wrench size: 27
Application:PEGASO Renault Neoplan Iveco