fiber optic cable

Made of high quality and impact resistant plastics with standard user interfaces.
Can accommodate 2 pcs of 1:8 splitter or one 1:16 splitter.

The fibers,250μm, either of single-mode or multimode type, are positioned in a loose tube made of a high modulus plastic.

JPT Electronics focuses on the R&D, production, sales and technology service of fiber optics, fiber lasers and intelligent equipment.

GYFJS Armored optic fiber cable is application for Indoor installation, with double jacket but non-metallic strength member.

Hot sell Indoor multi purpose distribution cable,
Direct sell from manufacture,
National telecom-level quality
Ease after-sales service

FTT-16 Fiber Optic Termination Box with Splitter 2 pcs of 1X8 PLC or 1 pcs of 1x16 PLC
For wall mounting or floor application

2 to 12 simplex cable are stranded around the metallic central strength member, the diameter of them always be 2.4mm,the the water blocking material

JPT Electronics focuses on the R&D, production, sales and technology service of fiber optics, fiber lasers and intelligent equipment.

This ring type drop wire clamp mostly used with optical fiber drop cable. This drop clamping device is necessary for FTTx solutions.

Non-armored stranded loose tube cable
Direct sell from manufacture,
National telecom-level quality
Ease after-sales service

The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic.

Fiber Optic Cable Jacket slitter is an efficient and indispensable tool for fiber optic cable termination.

JPT Electronics focuses on the R&D, production, sales and technology service of fiber optics, fiber lasers and intelligent equipment.

GJPFJV / GJPFJH Multi-fiber Unitized Distribution Fiber Optic Indoor Cable can be available from 16-144 fibers, with PVC and LSZH outer jacket.

The fibers, 250μm , are positioned in a loose tube made of a high modulus plastic.

JPT Electronics focuses on the R&D, production, sales and technology service of fiber optics, fiber lasers and intelligent equipment.

- Fiber to the Premise (FTTP)
- Fiber to the Home (FTTH)
- Passive Optical Networks (PON)
- Local Area Network (LAN)
- Cable Television (CATV)

The fibers, 250μm , are positioned in a loose tube made of a high modulus plastic.

- Hot melt adhesive
- Ceramic reinforcement member
- Heat shrinkable tube

The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic.

Remote control linear distance (m):300~500
Dimension (mm):477×488×763
Running speed (m/min):17
Horizontal pull (N):350

- FTTH cables
- Can be used as access building and drop cable
- Used indoor application

The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic.

sed to OPGW construction,two anti twist running board .the gap of anti twist running board is 2m

- Different structure and encapsulate mode is available.
- Low insertion loss, low PDL.
- High directivity, high return loss.

NECERO indoor fiber optical cable is made by evenly applying strands of Aramid yarns as the strength member over tight buffer fibers.

sed to OPGW construction,two anti twist running board .the gap of anti twist running board is 2m

1x32 PLC Splitter
Operating wavelength: 1260-1650 nm
Operating temperature: -40 to 85℃

The optical fiber unit is positioned in the centre. Two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides.

GCYFY Air Blown Fiber Optic Cable
if you want to buy,plz contact me, my skype is Candy.Foo2My email is aw at necero.com