lubrication

Centralized lubricaion system / Automatic greasing system for big equipment such as concrete equipment, harbor equipment, steel mill and sugar mill et

1. Max operation pressure reaching to 200bar
2. With indicators for checking working status
3. Direct grease supplied by pushing piston

1 Filtrating lubrication oil.
2 The special material filters can eliminate various impurities, water and gas effectively and rapidly.

SF-2 is a triple layer boundary lubricating material consisting of a
steel backing strip and a sintered porous bronze interlayer,
impregnated an

1.Low price, good service
2.high quality
3.Intermittent supply
4.Computer control

1. Many injectors more than 10 ports
2. Operation temperature: -10℃- 80℃
3. Used both for competent alternate for of grease

POM 0.03-0.50mm, anti abrasion, low friction coefficient even no oil given. The inside of the bearing are full ofindentions.

Centralized lubricaion system / Automatic greasing system for big equipment such as concrete equipment, harbor equipment, steel mill and sugar mill et

Centripetal joint bearing, angular contact bearings, thrust bearings, rod end joint bearing, self lubrication centripetal joint bearing;

1.Made of carbon alloy structure steel for top element and end element
2.Middle elements from 3pcs. to 8 pcs.
3.Max. pressure operation: 200bar

Centralized lubricaion system / Automatic greasing system for big equipment such as concrete equipment, harbor equipment, steel mill and sugar mill et

The easiest way to maintain, clean and lubricate hand pieces.

1. Signal line progressive distributor
2. Available as a secondary distributor
3. The left and right side with outlet ports

Description:
Capacity: 1.08~29m³/h
Pressure: 0.1~2.5MPa
Viscosity: ≤300mm²
Temperature: -20~300°C

Self-lubrication Bearing

Improve the anti-oxidation and lubricating properties of lubricants and extend the life of engine oil; Improve the power performance.

1. Max operation pressure reaching to 400bar
2. Presetting to grease feeding volume
3.With indicator or not optional

Self-lubrication Bearing

oil tank above 30L can be equipped with a low alarm device

Centralized lubricaion system / Automatic greasing system for big equipment such as concrete equipment, harbor equipment, steel mill and sugar mill et

1. Starting pressure less than and equals 18bar
2. Different outlet ports optional
3. Less pressure loss while operation

Self-lubrication Bearing

1. There are two sides of outlets
2. Installation threads of Rc 1/8
3. Large flow rate up to 1000mL/min.

Centralized lubricaion system / Automatic greasing system for big equipment such as concrete equipment, harbor equipment, steel mill and sugar mill et

1. Low starting operation pressure
2. Reliable working characteristics
3. Model of 6 to16 series option

1. Easy operation and maintenance
2. With 5.5mm size installation holes
3. Injectors are equipped with the blocks

oil purifier, oil filtration, Oil Separator, oil purification, oil
filter, oil recycling, oil treatment, oil machine, oil regeneration

1. Use with single dry pumps
2. Compact design with good sealing performance
3. Injector nos.: 1-2 optional

1. Grease lubrication with hand operation
2. Easy installed directly on the machine or on the wall plate
3. Small size for replacement

The port size is G1/4, and it got rated flow of 1700L/min, also it have bowl guarded.
We, FLPC is the leading provider of SMC air treatment units.