marble reinforcement mesh

Wire mesh cable tray surface finish: powder-coated.
Material: steel or stainless steel.

Category:Welded Wire Mesh
Material:Rib Wire
Properties:Welded Mesh
Application:Construction

zhengyang wire mesh products Co.,Ltd can manufacture welded reinforcement mesh as per customer's request.

Reinforcement mesh:
Material available:Low carbon steel wire with electro/hot-dipped galvanized,spray painting.
Opening:50*50mm,100*100mm.

Feature: The welding spots of warp wire and weft wire are on the same surface
Variety: Truss-Mesh Reinforcement
Ladder-Mesh Reinforcement

Fiberglass alkaline-resistant mesh fabric is manufactured using
C-glass or E-glass woven fabric, which is coated with acrylic acid
copolymer liq

Reinforced Welded Wire Mesh Panels are made of galvanized welded wire mesh for constructional uses.It is ease and economy of storage space.

A high quality expanded galvanized or stainless steel mesh for use primarily as anti-cracking reinforcement in the construction of brick

Reinforcing Bar Mesh
1,ISO 9001 Certification
2,Material: law carbon wire
3,Mesh:1/2'' 3/4'' 1''
4,Packing:in pallet

Reinforcement Mesh is made of stainless steel wirewhich is usd for supporting walls or non-supporting walls,floor boards,etc.

1.professional wire mesh manufacturer since 1998
2.material:ss wire,low-carbon iron wire
3.wire diameter:1.65-2.67mm

Reinforced Welded Wire Mesh Panels are made of galvanized welded wire mesh for constructional uses, for example, block slab structure reinforcing, hol

We offer heavy type welded wire mesh panels including steel bar welded wire mesh.

Material: Wire Rod and Ribbed Rebar
Wire diameter : from 3mm to 16mm.
panels opening: the Horizon from 50mm to 200mm, the Vertical from 25mm to 500m

Plastic wire mesh is made using unique extrusion, expansion or weaving processes to produce a wide range of apertures (hole sizes), weights.

The raw material for the manufacture of panels is the wire through cold rolling or by wire drawing using the hot-rolled wire produced in the steelwork

Welded Reinforcement Mesh Panel
Electro gal. or hot dipped gal.
Mesh:5x5,10x10 20x20cm,etc
Wire:3.15-12mm
Firm structure, nice and bright surface

Road Mesh is manufactured from double twisted steel wire mesh with transverse reinforcing rods evenly spaced throughout at approximately 16 cm centre.

Turf reinforcement mesh is an extruded plastic mesh for the protection and reinforcement of grass and turf. The turf reinforcement mesh st

Mesh reinforcement welding equipment parameter:
1.Wire diameter:5-12mm
2.Line wire distance:100-300mm
3.Weft wire distance:100-300mm

1.Wire Diameter:5-16mm
2.Horizontal Spacing:50.100.200.300.400mm
3.Vertical Spacing:50-600mm

Brickwork Reinforcement Mesh is used primarily as anti-cracking reinforcement in the construction of brick and block masonry.

ladder mesh
1 reduce cracking
2 increase lateral flexural strength
3 in composite or cavity wall
4 increase elasticity

steel reinforcement fabric
wire diameter: 10mm
aperture: 100x100mm
width x length: 2.2x11m
usage for bridge building

Pls supply the detail datas for the mesh aperture and wire diameter when you make an inquiry .

1.steel reinforcing wire mesh
2.ISO9001:2000
3.Marerial:black wire mesh
4.Type:welded mesh

Available at: hot dipped galvanized, electro galvanized or stainless steel.

Fiberglass mesh alkali resistant
Wall Waterproofing Material
Heat insulation materials building construction
Good cohesion Fire proof
High strengt

Concrete Reinforcing Mesh
Material:Low Carbon Steel Wire.
Wire:5mm-13mm.
Opening:10x10,10x20,20ox20cm,etc
Size:2.4x6m,5.8*2.3m

Variety: Truss-Mesh Reinforcement
Ladder-Mesh Reinforcement