power alnico magnets

Alnico materials (composed predominantly of aluminum, nickel, and cobalt with minor amounts of other elements including titanium and copper)

•Alnico Magnets:
1.Material: alumium, nickel, cobalt and iron with varying additions of other elements
2.Manufacturing process: Sintering and Cast

MATERIAL: Rare earth Alnico Magnets;
CERTIFICATION: ISO9001:2008; ISO/TS16949
Category:Special Alnico Magnets
Tolerance :+/-0.05
Coating: None

Alnico magnets, composed of primarily aluminum, nickel, and cobalt, were developed in the 1940's. This class of magnet remains a preferred material be

A deep cylindrical permanent magnet assembled concentrically in a mild steel pot with spacer of Aluminum or Copper.

Alnico magnet is widely used in all kinds of sensors and meters, electronics, instruments, medical instruments, teaching.

1) Strong Corrosion Resistances
2) Excellent Temperature Stability
3) Fine Grain
4) Compact Crystal

Sintered AlNiCo Magnets
1.High intensity ans strong anticorrosion
2.Stable magnetic performance
3.Highest working temperature reaches 500'C

cylinder alnico magnet
1) Grade: 2/3/4/5/6/7/8/9 etc.
2) Good magnetic properties
3) High working temperature
4) Short lead time

A cast aluminum nickel and cobalt has a low temperature coefficient, high temperature, resistant to moisture, oxidation is not easy, and good job sta

1.High intensity ans strong anticorrosion
2.Stable magnetic performance
3.Highest usage reach 500'C

dc generator permanent magnet,magnets with holes,cone shaped magnet,rare earth magnets for sale,large rare earth magnets,scrap magnet,large ring

Sintered AlNiCo Magnets

remanence (up to 1.25T),
low temperature coefficient. of -0.02% / ° C, while the maximum operating temperature up to about 450 ℃.

pecifications
1.Custom Alnico magnets
2.Working temperature up to 600'C
3.Custom shape and size
4.Superior quality

Cast AINiCo permanent magnets is a kind of alloy magnets made from AI, NI, Co, Fe and other trace metal elements and may be produced.

High corrosion resistance, High Mechanical strength, high temperature stability, good resistance to demagnetization due to shock but they are easily

High quality Alnico magnets at the lowest cost

1.Products are manufactured according to ISO9001 quality system.
2.High quality with competitive prices.
3.Different grades at your choices

Cylindrical AlNiCo can be applied in magnetic latching relay, Working Temperature Upto 550 C
Good Corrosion Resistance
Surface can be coated

Alnico materials (composed predominantly of aluminum, nickel, and cobalt with minor amounts of other elements including titanium and copper)

AlNiCo RING
1.Certificate: ISO9001:2008
2.Size: according to clients' request
3.grade: AlNiCo2/5/8 and so on.
a):Used in Motor,speaker ...

High maximum temperature up to 550 degrees C. They are the most suitable magnets for high temperature applications

MATERIAL: Rare earth Alnico Magnets;
CERTIFICATION: ISO9001:2008; ISO/TS16949
Category: Disc Alnico Magnets
Coating:None
Grade:LNG34

Alnico magnet is widely used in all kinds of sensors and meters, electronics, instruments, medical instruments, teaching.

cast AlNiCo magnet
1.high temperature stability
2.high corrosion resistance
3.custom shape,size,magnetized direction
4.

Product Type: Permanent Magnet
Material: Alnico
Material Grade: Alnico 2/3/5/6/7/8
Plating: None

Alnico materials (composed predominantly of aluminum, nickel, and cobalt with minor amounts of other elements.

Production of sintering the AlNiCo it using powder metallurgy method, suitable for the production of complex shapes, light, thin, small products.

alnico magnets,magnet suppliers,horseshoe magnet,spherical magnets,strong magnetic strips,very strong small magnets,flat rare earth magnets