solenoid steam valve

1.Pilot operated piston construction with low power
2.Seal serves longtime at steam ambient
3.Used for long-time working in pipeline system

Features:
1) Material: brass, bronze
2) Finish: chrome plated, nickel plated
3) Sizes: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"
4) Applicable medium

1)Solenoid valve have thread and flange connection
2)Medium:steam, hot water ,water, oil
3)Temp.:-5-180 degree
4)have material brass

Solenoid Valve,Pneumatic Solenoid Valve ,Brass Solenoid Valve,Stainless Steel Solenoid Valve,steam solenoid valve,high pressure solenoid valve

2L(US) Series Solenoid Valve, Pneumatic Control Valve,two way valve,Steam Solenoid Valve

1.Operating Temperature Rang: -5~+180℃
2.Material of Body: Brass
3.Material of Oil Seal: NBR

Steam valve used for steam iron, good desin to avoid leakage and withstand high pressure. orifice:2.5mm ,working pressure:0-25BAR,valve body:Barss

.type: steam valve
.Please contact factory for special voltage and specifcatin
.Good quality and low price
. one by one testing

1-) High Quality
2-) ISO/OEM/ODM/CE
3-) Label Service
4-) 20 Year Experience
5-) Custom Design Supported

2L Steam solenoid valve
2L Steam brass valve
Water valve

Solenoid Valve,Pneumatic Solenoid Valve ,Brass Solenoid Valve,Stainless Steel Solenoid Valve,steam solenoid valve,high pressure solenoid valve

Water Valve/Brass Solenoid Valve
Electric Water Valve-2/2 2L series solenoid valve
Fluid:Air, Water,Vapor
Working Pressure:0.2~1.5Mpa

1-) High Quality
2-) ISO/OEM/ODM/CE
3-) Label Service
4-) 20 Year Experience
5-) Custom Design Supported

Piston type solenoid valve connection size: 3/8"-2",orifice size :17mm-50mm,working pressure 1-15bar, valve body :Brass, seal:PTFE,temp:-5-180℃

1.Operating Temperature Rang: -10~+185℃
2.Material of Body: Brass
3.Material of Oil Seal: NBR

steam solenoid valve:
1) IP54
2) stainless steel 304 and 316
3) PTFE sealer
4) for hot water,steam

Solenoid Valve,Pneumatic Solenoid Valve ,Brass Solenoid Valve,Stainless Steel Solenoid Valve,steam solenoid valve,high pressure solenoid valve

2L (US)series solenoid valve is used for steam, air ,water, oil.Can withstand high temperature.The material of body is brass, the sealing ring is PETE

1.Standard voltage : 24VDC,110VAC, 220VAC
AC Voltage tolerance: ± 10% ,
DC Voltage tolerance:±1%.
2.Thread: BSPT, NPT , BSP.

1.Material body: Brass;
2.100% tested
3. please contact factory for different voltage

high-temperature resistance,large flow,high pressure
Aperture of Flow Rate : 22mm
Joint Pipe Bore : 1"
Material of Body : Brass

2/2 way normally closed solenid valve,small valve,water vlve,can be used for WATER SYSTEM,steam.,
-- Media: WATER,HOT WATER,Steam.
--0-16BAR

our product explosionproof solenoid valve, spool valve, ex-proof solenoid valve, fuel valve are produced according to the ISO9001:2000 standards.

Steam Piston pilot operated pneumatic diesel solenoid valve
1) Steam,water, hot water, air, oil (below 20cst)
2) SS304 and SS316 body
3) IP65

usually an actuator, allowing a relatively small signal to control a large device.

A180-4E2-PLL-DC24V

high-temperature resistance,large flow,high pressure
Aperture of Flow Rate : 30mm
Material of Body : Brass
Working medium : air,water,steam

1.Multiplex drive, piston guide,conductive normally closed.
2.Valve body material is brass.
3.Standard voltage : 24VDC,110VAC, 220VAC

2 inch 24v Steam water brass Solenoid valve
Media: Steam, hot water, air, oil (below 20cst)
Sealing material: PTFE
coil protection: IP54/IP65

USS series stainless steel steam solenoid valves are in high quality and reasonable prices. they enjoy good reputation home and abroad.