used oil regeneration

1.Application: used oil,motor oil,waste oil
2.Treatment Capacity:2000-10000L/8-10hours
3.Power Consumption: 0.1kw.h/kg used oil

Superiority:
This equipment can effectively remove acidic component from transformer oil, circuit breaker oil and insulation oil by using physical

The products absorb free carbon, gelatinous substance by macromolecule to reduce the cost and advance product quality.

Series JZS engine oil regeneration system is mainly for regenerating the waste engine oil, this equipment can effective separate water, gas etc.

Series BZ transformer oil regeneration device use of a special chemicals for purifying and regenerating the unqualified transformer oil, switch oil.

UVR 450/16 (C) plant is designed for complete oil and fuel reclamation. We can regenerate used mineral oil to the "like new" conditions

Lube oil filtration/ oil purifier/ oil purification
1. dehydration----removing the water content
2. degassing
3. remove the impurities in

This machine is used to purify unqualified turbine oil, especially the seriously emulsified turbine oil.

This is mainly for regenerating the waste engine oil. It can effective separate water, gas, particles, deeply oxides, free carbon,from oil

this machine can remove the impurities,gas and water form the transformer oil ,can imporve the breakdown voltage

Oil Regeneration Station URM-0,7 is designed to regenerate, remove solids, water and gases from lubrication and insulating oils whose viscosi

BZ uses of a special chemical for purifying and regenerating the the unqualified transformer oil, switch oil, mutual inductor oil.

Double stage vacuum transformer oil regeneration system, oil purifier, oil filtration, oil recycling, oil reclamation, oil purification, oil treatment

Vacuum Pump Unit is for exhausing and dehumidifying a transformer
suitable for long time use at site

JL series are applicable to filter mechanical oil, hydraulic oil, compressor oil, turbine oil, insulating oil, gasoline and diesel engine oil

TF series(TF-10 TF-20 TF-30 TF-50 TF-100 TF-150 TF-200) turbine used oil filtration equipmen

This oil purifier is used for treating the unqualified turbine oil, especially the seriously emulsified turbine oil

PLC Fully-Automatic Transformer Oil Treatment, Oil Circulate
1. Demulsification
2. Dewatering, degassing,
3. Removing impurity

To filtrate various of unqualified insulation oil including aging transformer oil esp. for the power which is above 110KV, mutual inductor oil, etc.

Adopt double-stage vacuum system to dewater, degas and remove impurities. Duplex 3D stereo-evaporation, eliminating the liquid water quickly.

Treat the unqualified lubricated oil, especially used those contain high value of acid.

Series JZC can demulsify and improve oil color, making the regenerated oil color close to new oil color, recover the oil performance.

recover and purify various high-precision lubricating oil such as hydraulic oil, mechanical oil, coolant oil, gear oil, heat treatment oil and so on.

1. This machine is suitable to recover and regenerate all kinds of inferior engine oil.
2. Also applicable to recover other kinds of waste oil.

BZ transformer oil regeneration device utilizes physiochemical means to recover deteriorated transformer oil and breaker oil.

This machine is used to purify and regenerate various high-precision lubricant oils, such as hydraulic oil, mechanic oil, coolant oil, gear oil.

oil filter,oil purifier,oil purify machine,oil clean machine,oil filtration,oil regeneration
applied to insulation oil,transformer oil.

Portable Oil Purifier
1.Live purify dynamical transformer oil
2.Purify transformer oil effectively
3.Regenerate transformer oil

VFD series is mainly used to improve the properties of insulation oil. It can remove trace water, gas, particulate matters etc.sinonsh315

Series JZS engine oil regeneration system is mainly for regenerating the waste engine oil, this equipment can effective separate water, gas, particles