AlNiCo ring magnet
Applications:
auto parts,
Cast aluminum nickel and cobalt with low temperature coefficient, operating temperature up to 550 degrees Celsius.
Casting process can be processed production into different sizes and shapes;
Cast aluminum nickel and cobalt with low temperature coefficient, operating temperature up to 550 degrees Celsius.
resistant to heat and moisture, not easy to oxidized, and working stability is the best,it is graet for high heat applications
So Alnico permanent magnet products are widely used in various instruments and other applications.
The advantages of the Alnico magnet remanence (up to 1.33T), low temperature coefficient. The temperature coefficient of -0.02% / ° C, while the maximum operating temperature up to about 550 ℃.
Shortcoming: the coercivity is very low (typically less than 140kA / m), demagnetization curve is nonlinear. Alnico magnets easily magnetized, also easy to demagnetization.
Applications:
auto parts,
instrumentation,
electro-acoustic
aerospace military
Water meter
Sensors
Electron tubes
Traveling wave tubes
Radar
Holding magnets
Clutches and bearings
Motors
Relays
Cow magnet
Educational products
other fields.
Cast AlNiCo magnetic energy parameters
Br | Hcb | (BH)max | α(Br) | α(Hcj) | Max. Operating Temp. | TC Curie Temp. | Remark | |
Grade | mT | kA/m | kJ/m3 | %K | %K | (°c) | (°c) | |
Gs | Oe | MGOe | ||||||
LN10 | 600/6000 | 40/500 | 10.00/1.20 | -0.02 | 0.03 | 450 | 810 | Isotropic |
LNG12 | 700/7000 | 44/550 | 12.00/1.50 | -0.02 | 0.03 | 450 | 810 | Isotropic |
LNG13 | 680/6800 | 48/600 | 13.00/1.63 | -0.02 | 0.03 | 450 | 810 | Isotropic |
LNG18 | 900/9000 | 48/600 | 18.00/2.25 | -0.02 | 0.03 | 450 | 810 | Isotropic |
LNG37 | 1200/12000 | 48/600 | 37.00/4.63 | -0.02 | 0.03 | 525 | 850 | Anisotropic |
LNG40 | 1250/12500 | 48/600 | 40.00/5.00 | -0.02 | 0.03 | 525 | 850 | Anisotropic |
LNG44 | 1250/12500 | 52/650 | 44.00/5.50 | -0.02 | 0.03 | 525 | 850 | Anisotropic |
LNG52 | 1300/13000 | 56/700 | 52.00/6.50 | -0.02 | 0.03 | 525 | 850 | Anisotropic |
LNG56 | 1300/13000 | 58/720 | 56.00/7.00 | -0.02 | 0.03 | 525 | 850 | Anisotropic |
LNG60 | 1330/13300 | 60/750 | 60.00/7.50 | -0.02 | 0.03 | 525 | 850 | Anisotropic |
LNGT18 | 580/5800 | 90/1130 | 18.00/2.25 | -0.02 | 0.03 | 550 | 860 | Isotropic |
LNGT30 | 1100/11000 | 56/700 | 30.00/3.75 | -0.02 | 0.03 | 550 | 860 | Anisotropic |
LNGT32 | 800/8000 | 100/1250 | 32.00/4.00 | -0.02 | 0.03 | 550 | 860 | Anisotropic |
LNGT38 | 800/8000 | 110/1380 | 38.00/4.75 | -0.02 | 0.03 | 550 | 860 | Anisotropic |
LNGT44 | 850/8500 | 120/1500 | 44.00/5.50 | -0.02 | 0.03 | 550 | 860 | Anisotropic |
LNGT48 | 900/9000 | 120/1500 | 48.00/6.00 | -0.02 | 0.03 | 550 | 860 | Anisotropic |
LNGT60 | 950/9500 | 110/1380 | 60.00/7.50 | -0.02 | 0.03 | 550 | 860 | Anisotropic |
LNGT72 | 1050/10500 | 112/1400 | 72.00/9.00 | -0.02 | 0.03 | 550 | 860 | Anisotropic |
LNGT88 | 1100/11000 | 115/1450 | 88.00/11.00 | -0.02 | 0.03 | 550 | 860 | Anisotropic |
LNGT36J | 700/7000 | 140/1750 | 36.00/4.50 | -0.02 | 0.03 | 550 | 860 | Anisotropic |
LNGT52J | 900/9000 | 140/1750 | 52.00/6.50 | -0.02 | 0.03 | 550 | 860 | Anisotropic |
Cast aluminum nickel and cobalt with low temperature coefficient, operating temperature up to 550 degrees Celsius.
resistant to heat and moisture, not easy to oxidized, and working stability is the best,it is graet for high heat applications
Type | composition | Magnetic properties | ||||
Br/T | Hc /(Ka/m) | (BH)m/ (kJ/m3) | Tc/℃ | Density g/cm-3 | ||
AlNiCo 5 | 8%-12%Al,15%-22%Ni 5%-24%Co,3%-6%Cu. Balance Fe | 0.7-1.32 | 40-60 | 9-56 | 890 | 7.3 |
AlNiCo8 | 7%-8%Al,14%-15%Ni 34%-36%Co,5%-8%Ti, 3%-4%Cu,Balance Fe | 0.3-0.44 | 250-350 | 25-36 | 450 | 7.3 |
1:5,SmCo | 62%-63%Co,38%-37%Sm | 0.9-1.0 | 1100-1540 | 117-179 | 720 | 8.1 |
2:17,SmCo | Sm(Co0.69Fe0.2Cu0.1Zr0.01)7.2 | 1.0-1.3 | 500-600 | 230-240 | 800 | 8.2 |
Bonded smco | Sm(Co0.67Fe0.22Cu0.1Zr0.07Ti0.01)7.1 | 1.0-1.07 | 800-1400 | 160-204 | 810 | 7.4 |
Sinter NdFeB | Nd13.5(Fe,M)bananceB6.1-7.0 | 1.1-1.4 | 800-2400 | 240-400 | 310-510 | 7.4-7.6 |
Bonded NdFeB | Nd4-13(Fe,M)bananceB6-12 | 0.6-1.1 | 800-2100 | 56-160 | 310 | 5.3-6.0 |