Product name :electrical tool control cable
1. to control special electrical tool operation
2. out cable is PVC 5.0MM
3. wire is 1.5MM,inner wire is galvanized
4. two end of wire is special zinc die casting ,5MM ball
5. total length is 550MM*720MM
6. the cable is be installed inner tool fittings to control use
7. zinc die casting pull-off power exceed 100KG
8. carton Packaging:50*20*15cm ,200pcs per QTY
9. G..W. is 14KG, N.W. is 13KG
Advantage of Electrical tool control cable
.Dielectric losses are very small
.Higher current carrying capacity
.Higher short circuit rating 250°C as against 160°C for PVC
."GRID CABLES" XLPE can retain flexibility down upto - 40°C
.Jointing and Termination is easy
.Light in weight
.They are not prone to fatigue damages due to vibrations or loading cycles
.Has better resistance to most chemicals, oils, acids, etc
.Can be installed along cable routes without elevation limitations
Use :These cables are used for flexible use for medium mechanical stredded with free movement without tensile stress in dry and moist condition for measuring and control in tool machines, conveyor belts, production lines in machinery production, steel production and electrical substations.
Advantage of Electrical tool control cable
.Dielectric losses are very small
.Higher current carrying capacity
.Higher short circuit rating 250°C as against 160°C for PVC
."GRID CABLES" XLPE can retain flexibility down upto - 40°C
.Jointing and Termination is easy
.Light in weight
.They are not prone to fatigue damages due to vibrations or loading cycles
.Has better resistance to most chemicals, oils, acids, etc
.Can be installed along cable routes without elevation limitations
Use :These cables are used for flexible use for medium mechanical stredded with free movement without tensile stress in dry and moist condition for measuring and control in tool machines, conveyor belts, production lines in machinery production, steel production and electrical substations.
