Summary
These are used to transport bulk materials in a horizontal or inclined plane. The design of the conveyor is dependent on operating conditions, the type of transported material and its properties. Traffic enforcement can be controlled by changing the speed of propulsion.
main parts
♦ Body (tube or trough)
♦ Worm (spiral shaft with iron)
♦ End Bearings
♦ Hopper
♦ Dump-tips
♦ Drive
Feature
♦ Conveyoring Material: Chemical, Building Material, Metallurgy, Food, Grain. Also Power Material and Big Viscidity Material
♦ Tilt Angle: 0~20 º
♦Temperature materials transportation: <=200 °c
Technical Data
| Standard spiral diameter (mm) | 150 | 200 | 250 | 300 | 400 | 500 | 600 | ||
| Screw pitch(mm) | 150 | 200 | 250 | 300 | 400 | 500 | 600 | ||
| Screw shaft standard RPM (r/min) | 20, 30 ,35, 45, 60, 75, 90, 120, 150, 190 | ||||||||
| Maximum throughput | coal | Screw axis maximum rpm (r / min) | 190 | 150 | 150 | 120 | 120 | 90 | 90 |
| Maximum throughput (t/h) | 4.5 | 8.5 | 16.5 | 13.5 | 54 | 79 | 139 | ||
| Clay | Screw axis maximum rpm (r / min) | 90 | 75 | 75 | 60 | 60 | 45 | 45 | |
| Maximum throughput (t/h) | 4.8 | 9.5 | 18.6 | 25.8 | 60.8 | 39.3 | 153 | ||
| sand | Screw axis maximum rpm (r / min) | 75 | 60 | 60 | 60 | 45 | 45 | 35 | |
| Maximum throughput (t/h) | 4.6 | 8.7 | 17 | 29.5 | 52 | 102 | 137 | ||
Service
1. Pre-sale services
Act as a good adviser and assistant of clients; enable them to returns on their investments.
2. Services during the sale
Respect clients; devote ourselves to improving the total value
3. After-sale services
Provide considerate services to minimize clients' worries.
.jpg)
.jpg)
