1.The cutting machine is very easy to install and maintain as a result of itssimple structure. The cutting and running are controlled by the same device,which makes maintenance more convenient.
2. After tilting the blank standsvertically with the width of 600mm and the height of 1200mm, which is unlikelyto be broken and drifted, thus helping achieve shorter cutting wire and highercutting precision.
3. The grooves on both sides of the blank can be milled atthe same time when the blank is cut vertically by the vertical cutting device,so no groove processing device is needed.
4. The step mobile cutting machineis used to process both building blocks and slabs. The blank can be cut in sixsides so that the quality of product will not be affected by mould oil and thedeformation of the mould.
5. The cutting machine can complete processes suchas tilting, vertical cutting and cross cutting in different positions.
2. After tilting the blank standsvertically with the width of 600mm and the height of 1200mm, which is unlikelyto be broken and drifted, thus helping achieve shorter cutting wire and highercutting precision.
3. The grooves on both sides of the blank can be milled atthe same time when the blank is cut vertically by the vertical cutting device,so no groove processing device is needed.
4. The step mobile cutting machineis used to process both building blocks and slabs. The blank can be cut in sixsides so that the quality of product will not be affected by mould oil and thedeformation of the mould.
5. The cutting machine can complete processes suchas tilting, vertical cutting and cross cutting in different positions.
WorkingPrinciple
The tilting hanger turns mould 90 degree in the air,demoulds the blank and puts it on the cutting table together with the sideplate. Then the blank will be cut by the longitudinal cutting device through themotor and its own running, after running at the pause position, it will be cuthorizontally by the cross cutting device that is driven by the motor to thecenter of the blank. The cross cutting holder drops and cuts vertically from upto down until it is reset upward.
The tilting hanger turns mould 90 degree in the air,demoulds the blank and puts it on the cutting table together with the sideplate. Then the blank will be cut by the longitudinal cutting device through themotor and its own running, after running at the pause position, it will be cuthorizontally by the cross cutting device that is driven by the motor to thecenter of the blank. The cross cutting holder drops and cuts vertically from upto down until it is reset upward.
JQF6.0MStep Mobile(Fixed) Cutting Machine
Name | Unit | index | Remarks |
Production capacity | 10 thousand M3/year | 10-30 | Annual production |
Size of green body | M | 6*1.2*0.6 | Net |
Cutting modules | mm | 5/10 | Vertical cutting/cross cutting |
Precision of cutting | mm | ±2±1.5±1.5 | Length, width, height |
Cycle of production | Min/mould | 5 | Vertical cutting/cross cutting |
Weight of production | T | 18 | |
Industrial capacity of cutting machine | KW | 12.9 |
