Hydrophobic PTFE Pleated membrane filters designed for removal of microorganisms and particles in aqueous liquids and solvents. APM-PTFE filters' asymmetric PTFE membrane provides absolute retention with superior flow rates and extended service life.
Hydrophobic PTFE Pleated membrane filters
Feature
Feature
1.Absolute ratings from 0.1µm to 0.5µm
2.Meets bacterial validation per HIMA/ASTM standards
3.Air Vent
4.Ultraclean - no additives, surfactants or post-treatments
5.100% integrity tested
6.Integrity testable in water
7.Inherently hydrophilic membrane
8.Clean room manufactured
Specifications
Dimensions & Constructure | Length | 9.75", 10", 20", 30", 40" |
ID | 30 mm | |
OD | 68 mm | |
Effective filtration area | 0.60 m2 per 10 inch | |
Material of Configurations | Filtration media | Depth matrix polypropylene |
Support layers | Polypropylene | |
Core | Reinforced Polypropylene | |
Gaskets | Silicone, EPDM , Viton & Teflon encapsulated type | |
| En Cap | DOE, P2,P3, P7,P8 & 215, 225 Single & Double O Rings | |
Operating Conditions | Maximum differential pressure | 37.5psi/ 2.5 bar at 120°C |
Maximum operating temperature | 176 °F/80 °C |
Applications
General Industry,Pharmaceutical & Biological industry, Chemical Industry,Process Water
Absolute-rated PP Pleated membrane filters
Model: PNM-(A)-(B)-(C)-(D)
A:Micron Rating
A:Micron Rating
0.1,0.22,0.45,1,5um
B.Length
5",10,20",30" & 40"
C:Connector
DOE
S2C (222+Close )
S2F (222+Fin )
S6C (226+ Close )
S6F (226 + Fin )
S5C (225 + Close )
1S5C (215+ Close )
CSS ( Install Stainless Steel )
D.O Ring
S ( Silicon )
E (EPDM)
V ( Viton )
N (NBR )
PV (PTFE+VITON)
.jpg)
