All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
Features:
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at 77 KHz
1 year warranty
60W 24V Switching Power Supply S-60-24 Mechanical Specification:
| MODEL | S-60-24 | |
| OUTPUT | DC VOLTAGE | 24V |
| RATED CURRENT | 2.5A | |
| CURRENT RANGE | 0 ~ 2.5A | |
| RATED POWER | 60W | |
| RIPPLE & NOISE (max.) Note.2 | 150mVp-p | |
| VOLTAGE ADJ. RANGE | 21.6 ~ 26.4V | |
| VOLTAGE TOLERANCE Note.3 | ±1.0% | |
| LINE REGULATION | ±0.5% | |
| LOAD REGULATION | ±0.5% | |
| SETUP, RISE TIME | 300ms, 50ms, /230VAC800ms, 50ms/115VAC at full load | |
| HOLD TIME(Typ.) | 80ms/230VAC12ms/115VAC at full load | |
| INPUT | VOLTAGE RANGE | 85 ~ 264VAC120 ~ 370VDC |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| EFFICIENCY (Typ.) | 79% | |
| AC CURRENT | 2A/115VAC 1A/230VAC | |
| INRUSH CURRENT (max.) | COLD START 20A/115VAC40A/230VAC | |
| LEAKAGE CURRENT | <3.5mA / 240VAC | |
| PROTECTION | OVERLOAD | 105 ~ 150% rated output power |
| Protection type: Hiccup mode, recovers automatically after fault condition is removed. | ||
| OVER VOLTAGE | 27.6 ~ 32.4V | |
| Protection type: Hiccup mode, recovers automatically after fault condition is removed. | ||
| ENVIRONMENT | WORKING TEMP. | -10 ~ +60ºC |
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |
| STORAGE TEMP., HUMIDITY | -20 ~ +85ºC, 10 ~ 95% RH | |
| TEMP. COEFFICIENT | ±0.03%/ºC (0 ~ 50ºC) | |
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | |
| SAFETY & EMC (Note 4) | SAFETY STANDARDS | Design refer to UL1012, UL1950, TUV EN60950-1 |
| WITHSTAND VOLTAGE | I/P-O/P: 1.5KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC | |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | |
| EMI CONDUCTION & RADIATION | Compliance to EN55022 (CISPR22) Class B | |
| HARMONIC CURRENT | Compliance to EN61000-3-2,-3 | |
| EMS IMMUNITY | Compliance to EN61000-4-2,3,4,5;6,8,11; ENV50204, EN55024, Light industry level,criteria A | |
| OTHERS | MTBF | 316.2K hrs min. MIL-HDBK-217F (25ºC) |
| DIMENSION | 159*97*38mm (L*W*H) | |
| PACKING | 0.47Kg; 30pcs/15.56Kg/0.0250CMB | |
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12"twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | |
60W 24V Switching Power Supply S-60-24 Mechanical Specification:
60W 24V Switching Power Supply S-60-24 Certificate for LVD:
S-60-24 Certificate for EMC:
60W Switching 24V Power Supply
60W Switching 24V Power Supply
.jpg)
.jpg)
