With advanced techniques of SS Angle Bar forming and bending, our SS Angle Bar is manufactured with great bearing capability. SS Angle Bar is a durable item, resistant from moisture and acidic conditions; Hence, users wouldn't have to worry about if Stainless Steel Angle Bar is vulnerable to getting rotten easily.
1.Standards GB,AISI,ASTM,DIN,JIS
2.Grade
200 Series—201,202,200Cu,201Cu
300 Series_301,302,303,303Cu,304,304Cu,304H,316,316L
400 Series_410,416,420,420F,430,430F
3.Shape:Round,Square,Angle,Flat,Hexagonal
4.Surface:Brightness,Polished,Turn Smooth(peeled)
5.Length:According to client's special requirements,it is below 6m
6.Diameter Size:1.0mm-50mm
7.Application:Electronic,Hardware,Construction,Mechanical,Medical,Traffic,etc.
2.Grade
200 Series—201,202,200Cu,201Cu
300 Series_301,302,303,303Cu,304,304Cu,304H,316,316L
400 Series_410,416,420,420F,430,430F
3.Shape:Round,Square,Angle,Flat,Hexagonal
4.Surface:Brightness,Polished,Turn Smooth(peeled)
5.Length:According to client's special requirements,it is below 6m
6.Diameter Size:1.0mm-50mm
7.Application:Electronic,Hardware,Construction,Mechanical,Medical,Traffic,etc.
Name: | SS Angle Bar | |||||
Standard: | ASTM A554, A312, A249, A269 and A270 | |||||
Material Grade: | 304, 316, 201, 202, 430, 304L, 316L, 430, 904, 904L | |||||
Size Range: | 25*25*3-100*100*10mm | |||||
Length: | 6m or as customers' request | |||||
Tolerance | A)Wide:+/- 0.15mm | |||||
B)Thickness:+/- 0.02mm | ||||||
C)Length:+/- 4.5mm-0mm | ||||||
Surface: | 180G, 320G, 400G Satin / Hairline(Matt Finish, Brush, Dull Finish) 400G, 500G, 600G or 800G Mirror finish | |||||
Application: | Ornamental tubes, Decoration construction, upholstery, industry instruments | |||||
Test: | Squash test, Extended test, Water pressure test, Crystal rot test, Heat treatment, NDT | |||||
Chemical Composition Of Material | Composition Material | 201 | 202 | 304 | 316 | 430 |
C | <0.15 | <0.15 | <0.08 | <0.08 | <0.12 | |
Si | <1.00 | <1.00 | <1.00 | <1.00 | <1.00 | |
Mn | 5.5-7.5 | 7.5-10 | <2.00 | <2.00 | <1.00 | |
P | <0.06 | <0.06 | <0.045 | <0.045 | <0.040 | |
S | <0.03 | <0.03 | <0.030 | <0.030 | <0.030 | |
Cr | 16-18 | 17-19 | 18-20 | 16-18 | 16-18 | |
Ni | 3.5-5.5 | 4-6 | 8-10.5 | 10-14 | - | |
Mo | - | - | - | 2.0-3.0 | - | |
Mechanical Property | Material | 201 | 202 | 304 | 316 | |
Tensile Strength | >535 | >520 | >520 | >520 | ||
Yield Strength | >245 | >205 | >205 | >205 | ||
Extension | >30% | >30% | >35% | >35% | ||
Hardness(HV) | <253 | <253 | <200 | <200 | ||
