Features:
AC input range selected by switch
Protections: Short circuit / Over voltage / Over load / Over temp.
High reliability / Low ripple noise
Built-in remote sense function
Built-in remote ON-OFF control
With parallel function
Can adjust from 20~100% output voltage by external control 1-5V
Forced air cooling by built-in DC fan
Case coating with paint
1 year warranty
| MODEL | SCN-600-12 | SCN-600-15 | SCN-600-18 | SCN-600-24 | SCN-600-48 | |
| OUTPUT | DC VOLTAGE | 12V | 15V | 18V | 24V | 48V |
| RATED CURRENT | 50A | 40A | 33A | 25A | 12A | |
| CURRENT RANGE | 0 ~ 50A | 0 ~ 40A | 0 ~ 33A | 0 ~ 25A | 0 ~ 12A | |
| RATED POWER | 600W | 600W | 600W | 600W | 600W | |
| RIPPLE & NOISE (max.) Note.2 | 120mVp-p | 150mVp-p | 180mVp-p | 240mVp-p | 480mVp-p | |
| VOLTAGE TOLERANCE Note.3 | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
| LOAD REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
| SETUP, RISE, HOLD TIME | 800ms, 50ms, 16ms at full load | |||||
| INPUT | VOLTAGE RANGE | 90 ~ 130VAC / 180~260VAC selected by switch 260~370VDC | ||||
| FREQUENCY RANGE | 47 ~ 63Hz | |||||
| EFFICIENCY (Typ.) | 80% | 81% | 82% | 85% | 87% | |
| AC CURRENT | 11A / 115VAC 7.0A / 230VAC | |||||
| INRUSH CURRENT (max.) | 60A / 230VAC | |||||
| LEAKAGE CURRENT | 3.5mA / 240VAC | |||||
| PROTECTION | OVERLOAD | 110~135% rated output power | ||||
| Protection type: Current limiting, delay Shut down o/p voltage,re-power on to recover. | ||||||
| OVER VOLTAGE | 110~135% follow to output set up point | |||||
| Protection type: Shut down o/p voltage, re-power on torecover. | ||||||
| OVER TEMPERATURE | >100ºC / measure by heat sink, near transformer | |||||
| Protection type: Shut down o/p voltage, re-power on torecover | ||||||
| ENVIRONMENT | WORKING TEMP.,HUMIDITY | -10 ~ +65ºC, 20 ~ 90% RH | ||||
| STORAGE TEMP., HUMIDITY | -20 ~ +85ºC, 10 ~ 95% RH | |||||
| TEMP. COEFFICIENT | ±0.04%/ºC (0 ~ 50ºC) | |||||
| VIBRATION | 10 ~ 200Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Zaxes | |||||
| SAFETY & EMC | SAFETY STANDARDS | Design refer to UL1950, CSA22.2, IEC60950 | ||||
| EMI CONDUCTION & RADIATION | Compliance to FCC part 15 class A | |||||
| WITHSTAND VOLTAGE | I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | |||||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | |||||
| OTHERS | MTBF | 120khrs min. MIL-HDBK-217F (25ºC) | ||||
| DIMENSION | 291*132*68mm (L*W*H) | |||||
| PACKING | 2.3kg; 8pcs/ 24kg/ CARTON | |||||
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VACinput, rated load and 25ºC of ambient temperature. 2. Ripple & noise aremeasured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated witha 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set uptolerance, line regulation and load regulation. 4. The power supply isconsidered a component which will be installed into final equipment. The finalequipment must be re-confirmed that it still meets EMC directives. | |||||
600W DC Power Supplies SCN-600 Mechanical Specification:
600W DC Power Supplies SCN-600 Certificate for LVD:
600W DC Power Supplies SCN-600 Certificate for EMC:
