Characters:
* Higher mechanical strength, better dielectric strength with thinner insulation ply;
* Excellent heat resistance ,used as class- H insulation and can work for a long term at
180°C but short time at 260°C;
* Good flexibility, better tear resistance and excellent workability, and can be glued on the
different-sized workpieces;
* Self-sticking and good bonding strength , no removal after stripping off;
* Different thickness and width to meet customers' specific requirements;
Applications
Temporary bonding of thermocouples for oven profiling
Bonding of devices prior to solder reflow
Splicing of Insulation Layers
Masking in high temperature powder applications
Gold Finger Masking
Insulating circuit boards and coils
Data form
Item | Properties | Unit | Values | ||||||||
μm | 12.5 | 25 | 30 | 40 | 50 | 75 | |||||
1 | Density | g/cm3 | 1.42±0.02 | ||||||||
2 | Tensile Strength | MD ≥ | MPa | 160 | 185 | 175 | 160 | 155 | 150 | ||
TD ≥ | 155 | 170 | 160 | 150 | 140 | 135 | |||||
3 | Elongation at rapture ≥ | % | 60 | ||||||||
4 | Shrinkage (only for reference) | 150°C 30min ≤ | % | 0.15 | |||||||
400°C 30min ≤ | 2.0 | ||||||||||
5 | Breakdown Strength (48~62Hz) | Average | MV/m | 210 | 210 | 190 | 170 | 160 | 150 | ||
Individual | 190 | 190 | 180 | 160 | 135 | 120 | |||||
6 | *Surface Resistance 200°C | Ω | ≥1.0×1013 | ||||||||
7 | *Volume Resistance 200°C | Ω·m | ≥1.0×1010 | ||||||||
8 | *Dielectric Constant (48~62Hz) | --- | 3.5 | ||||||||
9 | *Loss Tangent (48~62Hz) | --- | ≤0.004 |
Note:The values noted in above technical specification are given only for our customers' reference and
should not be used in writing specifications.
Our Factory Competitive Advantages
*Well Competitive Prices and High Quality Control *Prompt Delivery *Customer's Design and Logo are Welcome *Fit for Gifts and Premiums *Earth-friendly Products *In a Variety of Design *Small Order Acceptable *OEM Accepted |
About factory:
Jiangsu Yabao Insualtion Material Co., Ltd. was established in 1986, specializing
in producing insulation materials: i.e.
Polyimide film series: | Polyimide Film 6051 Corona-resistant Polyimide Film (CR Film) Polyimide Film with F46 (FEP) Tape |
Adhesive tape series | Polyimide Film with Acrylic Adhesive Tape Polyimide Film with Silicone Adhesive Tape |
Composite material series | Composite material (NHN, NMN) Mica insulation material (mica tape, mica foil and mica board). |
Packing, Mark, Preservation and Transportation
1. The film should be provided in rolls and wound up to the pipe core, each roll is well packed and loaded with
plastic bag to be placed into dry and clean box.
2. The each box packing should be marked with the type, product specification, size, lot number, gross weight,
net weight, date of manufacture, name of the manufacturer and the product acceptances certificate is attached.
At the same time the painting words of Damp-proof collision-proof.