2.Standard:ASTM
3.Grade:300 series
4.Thick:0.05mm-3.0mm
5.Width:1mm-420mm
We supply this grade in the following forms: Bar, wire, sheet, plate, coil, fasteners and forgings.
STAINLESS STEEL 310 is a highly alloyed austenitic stainless steel used for high-temperature applications. The high chromium and nickel contents give the steel excellent oxidation resistance as well as high strength at high temperatures. This grade is also very ductile, and has good weldability enabling its widespread usage in many applications.
STAINLESS STEEL 310S is the low carbon version of 310 and is suggested for applications where sensitization, and subsequent corrosion by high temperature gases or condensates during shutdown may pose a problem.
STAINLESS STEEL 310S is the low carbon version of 310 and is suggested for applications where sensitization, and subsequent corrosion by high temperature gases or condensates during shutdown may pose a problem.
Typical analysis in percent
C | MN | P | S | Si | Cr | Ni | Al | Fe | |
310 | 0.25 | 2.00 | 0.045 | 0.030 | 0.03 | 24.0-26.0 | 19.0-22.0 | 0.25-0.60 | Balance |
310S | 0.08 | 2.00 | 0.045 | 0.03 | 0.03 | 24.0-26.0 | 19.0-22.0 | 0.25 - 0.60 | Balance |
Typical mechanical properties(At room temperature)
Ultimate tensile strength(mpa) | Yield strength(mpa) | Elongation in 50 mm(%) | |
310 | 625 | 350 | 50 |
310S | 575 | 290 | 50 |
