20 pairs dry straight splicing module
| ITEM NO | UNIT | DESCRIPTIONS |
| TP-1307-10 | pcs | 10 pairs straight splicing module, dry |
| TP-1307-10G | pcs | 10 pairs straight splicing module, gel filled |
| TP-1307-20 | pcs | 20 pairs straight splicing module, dry |
| TP-1307-20G | pcs | 20 pairs straight splicing module, gel filled |
| TP-1307-25 | pcs | 25 pairs straight splicing module, dry |
| TP-1307-25G | pcs | 25 pairs straight splicing module, gel filled |
| TP-1307-2TS | pcs | 2-poletest cord for splicing module, test plug to screw terminal |
Descriptions
TP-1307-10G 10 pairs straight splicing module is used throughout the distribution level, in the mechanical or heat shrink copper enclosure. It is highly reliable and cost-effective wire connection system for modern telecommunications and data networks.
It adopts IDC (Insulation Displacement Connection) technique, which means that no soldering, wire-stripping or the use of screws is necessary , thus dramatically reducing the risk of a poor termination and increasing the wiring productivity.
Main Features
Insulation Displacement Connection
No Wire-stripping, screw and solder free
Reliable connections
Flame retardant performance
Modular design and installations
Gas tight connection
One push wire insertion
No Wire-stripping, screw and solder free
Only one inexpensive tool required
Technical Parameters
Working temperature: -40℃ ~ 80℃
Relative humidity: ≤93%(+40℃)
Appearance: the color of all metal and plastic parts is uniform, without any scratch, rust, crusting and cracks.
The labels are clear and complete.
Insulation resistance: under normal ambient conditions, after high temperature test, low temperature test, temperature varing test and humidity heat test, the insulation resistance between any two independent contacts, and/or between contacts and metal parts ≥ 1000MΩ
Contact resistance between contacts: under normal ambient conditions, the contact resistance between contacts ≤7 mΩ. After high temperature test, low temperature test, temperature varing test and humidity heat test, the increasing resistance ≤3 mΩ And after inserting the connection cord (or test cord) into the module for 200 times, the increasing resistance ≤3 mΩ
Contact resistance between conductor and contact: under normal ambient conditions, the contact resistance between contacts ≤3 mΩ. After high temperature test, low temperature test, temperature varing test and humidity heat test, the increasing resistance ≤2 mΩ. And after terminating for 200 times, the increasing resistance ≤2 mΩ.
Dielectric strength: under normal ambient conditions, after high temperature test, low temperature test, temperature varing test and humidity heat test, the insulation resistance between any two independent contacts, and/or between contacts and metal parts is able to withstand an AC voltage of 1000V (virtual value) at 45Hz~60Hz sinowave for 1 minute, without spark over and flying arc
Gas tight performance: contact touches the conductor at both sides, and thus forming the gas tight area, while the area of gas tight occupies ≥50% of the touched area on each side.
Conductor diameter range: 0.32mm-0.6mm, while insulation ≤ 1.4mm
Pulling strength:≥25N while pulling from the vertical side of the contacts
Flame retardant performance: all plastic parts are flame retardant, reaching grade of UL FV0
Life circle: ≥200 times
Order Data
Item No | Descriptions |
TP-1307-20 | 20 pairs straight splicing module, dry |
Related product for 20 pairs dry straight splicing module
.jpg)
.jpg)
.jpg)
