Hammer crusher crushes materials by the high-speed rotating of the hammer and the collision of the materials' surface. It features simple structure, high crushing ratio,high capacity, etc. which can be used for dry and wet crushing.Hammer crusher used for crushing various mid-hard and weak abrasive materials.The compressive strength of the materials do not exceed 100MPa and water content less than 15%.It is widely used for crushing coal,salt,chalk,gypsum,brick,limestone and so on. In addition, the hammer crusher can be used not only in stone production line, sand production line, but also in minertal processing line to replace cone crusher. Hammer crusher is widely applied in mining, cement, coal,metallurgy, building materials,roads, fuel,etc. which is for the medium hardness and brittle materials.The hammer crusher can adjust the grate gap to change the output of the material according to users' requirements.
Working Principle
The European hammer crusher casing, rotor, bearing the hammer and the grate bars and other components. Upper and lower case in two parts, welded together by a steel plate after cutting, the remaining parts bolted into one. Set with high manganese steel liner inside the case, to facilitate replacement of worn; its array of rules installed on the spindle distribution of the hammer, hammer and rotary table and through the rotor shaft formed. Host through the motor, V-belt driven spindle, so that the rotor rotates, hammer by the centrifugal force generated by rotation around the stretch to, bulk materials from the feed inlet into the crushing chamber, the high-speed movement of the hammer will be crushed. Broken by passing the material under.
Specification:The European hammer crusher casing, rotor, bearing the hammer and the grate bars and other components. Upper and lower case in two parts, welded together by a steel plate after cutting, the remaining parts bolted into one. Set with high manganese steel liner inside the case, to facilitate replacement of worn; its array of rules installed on the spindle distribution of the hammer, hammer and rotary table and through the rotor shaft formed. Host through the motor, V-belt driven spindle, so that the rotor rotates, hammer by the centrifugal force generated by rotation around the stretch to, bulk materials from the feed inlet into the crushing chamber, the high-speed movement of the hammer will be crushed. Broken by passing the material under.
Model | Feeding Size (mm) | Discharging Size (mm) | Capacity (t) | Motor Pole | Power (kw) | Weight (t) | Overall Dimension (mm) |
PC400*300 | ≤200 | ≤25 | 5-10 | 4 | 11 | 0.8 | 900×670×860 |
PC600*400 | ≤250 | ≤30 | 10-22 | 4 | 22 | 1.5 | 1200×1050×1200 |
PC800*600 | ≤250 | ≤25 | 18-40 | 4 | 55 | 3.8 | 1310×1180×1310 |
PC1000*800 | ≤350 | ≤35 | 25-50 | 4 | 75 | 4.9 | 1600×1390×1575 |
PC1000*1000 | ≤300 | ≤35 | 30-55 | 6 | 132 | 8 | 1800×1590×1775 |
PC1250*1250 | ≤350 | ≤35 | 35-65 | 6 | 180 | 14 | 2060×1600×1890 |
PC1400*1400 | ≤350 | ≤35 | 50-100 | 6 | 280 | 32 | 2365×1870×2220 |
PC1600*1600 | ≤350 | ≤35 | 100-150 | 8 | 480 | 37.5 | 3050×2850×2800 |
