Indoor 6000 pairs frame type MDF for LSA module
1) It is used indoor for copper cables. The cabinet is a complete cabinet, consisting of the door, ceiling, base, mounting frames for mounting LSA modules, and with cable guide for wiring and managing of the cables. And all these elements are sealed off among themselves. The cabinet is made of cold rolling steel, with powder coated. It is secure to install the parts of the cabinet.
1) It is used indoor for copper cables. The cabinet is a complete cabinet, consisting of the door, ceiling, base, mounting frames for mounting LSA modules, and with cable guide for wiring and managing of the cables. And all these elements are sealed off among themselves. The cabinet is made of cold rolling steel, with powder coated. It is secure to install the parts of the cabinet.
2) The back mounting frames are made of stainless steel, rustproof, and joined by screws. There are solid terminal on the back mount frame for the connection to the earth. On the frames, hooks and guides and clamps are designed for the wiring and management of the cables. All the necessary parts are included in the cabinet, such as screws, fasteners, bolts etc.
3) The opening angle of the door is > 110°, with an arm to hold it, locking for maximum security and a card holding case is designed on the door for the identification of the inlets and outlets pairs.
System of earthing is provided in the cabinet for sound earthling performances.
Order Data
| ITEM NO | UNIT | DESCRIPTIONS |
| TP-1809-1200 | pcs | Indoor 1200 pairs MDF, for LSA module, frame type, with back mount frame, withoutLSA module |
| TP-1809-2400 | pcs | Indoor 2400 pairs MDF, for LSA module, frame type, with back mount frame, without LSA module |
| TP-1809-3000 | pcs | Indoor 3000 pairs MDF, for LSA module, frame type, with back mount frame, without LSA module |
| TP-1809-4000 | pcs | Indoor 4000 pairs MDF, for LSA module, frame type, with back mount frame, without LSA module |
| TP-1809-5000 | pcs | Indoor 5000 pairs MDF, for LSA module, frame type, with back mount frame, without LSA module |
| TP-1809-6000 | pcs | Indoor 6000 pairs MDF, for LSA module, frame type, with back mount frame, without LSA module |
Technical Parameters
1) Contact resistance between conductor and contact: under normal ambient conditions, the contact resistance between contacts ≤3 mΩ. After high temperature test, low temperature test, temperature varing test and humidity heat test, the increasing resistance ≤2 mΩ. And after terminating for 200 times, the increasing resistance ≤2 mΩ.
2) Dielectric strength: under normal ambient conditions, after high temperature test, low temperature test, temperature varing test and humidity heat test, the insulation resistance between any two independent contacts, and/or between contacts and metal parts is able to withstand an AC voltage of of 1000V (virtual value) at 45Hz~60Hz sinowave for 1 minute, without spark over and flying arc
3) Gas tight performance: contact touches the conductor at both sides, and thus forming the gas tight area, while the area of gas tight occupies ≥50% of the touched area on each side.
4) Conductor diameter range: 0.32mm-0.6mm, while insulation ≤ 1.4mm
5) Pulling strength:≥25N while pulling from the vertical side of the contacts
6) Flame retardant performance: all plastic parts are flame retardant, reaching grade of UL FV0
7) Silver plating thickness: 0.5um
8) Life circle: ≥200 times
Indoor 6000 pairs frame type MDF for LSA module 
