| ITEM NO | UNIT | DESCRIPTIONS |
| TP-1316-10 | pcs | 10pairs revised STG disconnection module |
| TP-1316-8 | pcs | 8pairs revised STG disconnection module |
Descriptions
STG module is the mostly widely used IDC module and ideal connectivity products. It adopts IDC (Insulation Displacement Connection) technique. The plastic is ABS. The contact is stannum phospher bronze, with silver plated.
Techinical Parameters
1) Working temperature: -40℃ ~ 80℃
1) Working temperature: -40℃ ~ 80℃
2) Relative humidity: ≤93%(+40℃)
3) Appearance: the color of all metal and plastic parts is uniform, without any scratch, rust, crusting and cracks.
4) The labels are clear and complete.
5) Insulation resistance: under normal ambient conditions, after high temperature test, low temperature test, temperature varing test and humidity heat test, the insulation resistance between any two independent contacts, and/or between contacts and metal parts ≥ 1000MΩ
6) Contact resistance between contacts: under normal ambient conditions, the contact resistance between contacts ≤7 mΩ. After high temperature test, low temperature test, temperature varing test and humidity heat test, the increasing resistance ≤3 mΩ And after inserting the connection cord (or test cord) into the module for 200 times, the increasing resistance ≤3 mΩ
7) Contact resistance between conductor and contact: under normal ambient conditions, the contact resistance between contacts ≤3 mΩ. After high temperature test, low temperature test, temperature varing test and humidity heat test, the increasing resistance ≤2 mΩ. And after terminating for 200 times, the increasing resistance ≤2 mΩ.
8) Dielectric strength: under normal ambient conditions, after high temperature test, low temperature test, temperature varing test and humidity heat test, the insulation resistance between any two independent contacts, and/or between contacts and metal parts is able to withstand an AC voltage of 1000V (virtual value) at 45Hz~60Hz sinowave for 1 minute, without spark over and flying arc
9) Gas tight performance: contact touches the conductor at both sides, and thus forming the gas tight area, while the area of gas tight occupies ≥50% of the touched area on each side.
10) Conductor diameter range: 0.32mm-0.6mm, while insulation ≤ 1.4mm
11) Pulling strength:≥25N while pulling from the vertical side of the contacts
12) Flame retardant performance: all plastic parts are flame retardant, reaching grade of UL FV0
13) Life circle: ≥200 times
8 pairs revised STG disconnection module
8 pairs revised STG disconnection module
Related product for 8 pairs revised STG disconnection module
Related product for 8 pairs revised STG disconnection module
.jpg)
.jpg)
