window machine
Performance characteristic
Performance characteristic
1) Driven by Pneumatic transmission, hydraulic execution, and no need hydraulic station. So it has some characterics, such as high speed,stable moving, no noise and no pollution.
2) The adjustable hydraulic cylinder driving the left and right corner combing cutters, adjust the two cutters independent and reads position(can be accurated to 0.1mm).So it is convenient and quickly.
3) The upper and down corner combing cutters can be adjusted by marks. So it makes the adjustment of cutters more convenient.
4) The machine can complete power saving above 95% compare with hydraulic transmission. And it is total power is 150W.
5) The machine can match single corner combing cutter with several points.So it increases the angle strength.
6) The machine can stamping serveral highly points according to profile.
7) The material supporter of one side can be fold.
8) When change the profile ,it is not need to adjust.
9) The cutters with same stamping power ,avoid deformation and make the angle more strong.
Technical parameter
Power supply: 220V 50Hz
Motor power 1.5KW
Operation air pressure:0.5-0.8Mpa
Air consumption: 2L/min
Air consumption: 2L/min
combining pressure: 26-38KN
Corner combining cylinder run travel: 75mm
Main locating block setting range:70mm
Max profile processing height:120mm
Corner combining cylinder run travel: 75mm
Main locating block setting range:70mm
Max profile processing height:120mm
Max profile processing width:90mm
Overall dimension: 1800×1600×1300mm
Overall dimension: 1800×1600×1300mm
Weight :300kg
