Packing
Product Size(mm)
80W
100W
120W
150W
1150W
0200W
Explosion-proofParameters
1)Explosion-proof(Grade)
1, Explosion proof form code of explosion proof electric equipment, nR for restrict breathing type, the others: D for explosion suppression type; IA for flameproof intrinsically safe type; MB for pouring type ….;
2,Explosion proof electrical equipment is divided into type Ⅰ,Ⅱ,Ⅲclass; class I used for coal mine gas environment; class II, III used for other explosive gases electric equipments except coal mines which can easily generate gas.
3, Electrical equipment external surface temperature range ( T4 means the temperature of any point on the external surface of UFO explosion-proof mining lamp ≤ 135 ℃);
4,Electric equipment protection level, and has a corresponding relationship to its used place, Gc level of protection for the general, and it can be used in explosive gas environment –Zone 2;
2)Hazardous area classification
Explosive substance | Area definition | Chinese standard | Foreign standards |
Gas(ClassⅠ) | Under normal circumstances, the explosive gas mixture continuously or long time existence. | Zone 0 | Div.1 |
Under normal circumstances, the explosive gas mixture is likely to existent site | Zone 1 | ||
Under normal circumstances, the explosive gas mixture is not possible appear, Only in abnormal circumstances, occasionally or short time existed site ; | Zone 2 | Div.2 | |
Dust or fiber(ClassⅡ/ClassⅢ) | Under normal circumstances, explosive dust or combustible fibre and air mixture may be continuous, a short time frequent appear or long time existence. | Zone 10 | Div.1 |
Under normal circumstances, explosive dust or combustible fibre and air mixture can not appear, just in case of abnormal condition, occasionally or short time appears. | 1 Zone 11 | Div.2 |
3)Gas temperature group
Temperature category | Explosion proof electrical equipment surface temperature | Common explosive gas |
T1 | ≤450℃ | MethaneTolueneMethyl esterEthanePropaneAcetoneAcrylic acidBenzeneStyreneCarbon monoxideEthyl acetateAcetic acidChlorobenzeneMethyl acetateAmmoniaAcrylic esterTwo etherCity gasHydrogenWater gas |
T2 | ≤300℃ | MethanolEthanolEthyl benzenePropyl alcoholPropyleneButyl alcoholButaneButyl acetate Amyl acetateCyclopentaneButadieneEpoxy propaneEthyleneAcetylene |
T3 | ≤200℃ | PentaneAmyl alcoholHexaneHexyl alcoholHeptaneOctaneRing of ethanolTurpentine oilNaphthaPetroleum (gasoline )Fuel oilAmyl alcohol fourTwo etherAcroleinHydrocarbon |
T4 | ≤135℃ | AcetaldehydeTetrafluoroethyleneTrimethylamineEthyl etherTwo ether |
T5 | ≤100℃ | Carbon disulfide |
T6 | ≤85℃ | Acid ethyl esterNitrous acid ethyl ester |
This series explosion-proof lamp temperature group is T4, according to the above standard data, this series lamp can be used in the warehouse, workshop in the scope of T1, T2, T3, T4, and related places that require explosion-proof lamp lighting can be applied.
Specifictions:
| Item No: | SW-400HBL80W-Ex | |||
| LED Power: | 80W | Ex-marking | ExnRⅡT4Gc | |
| Work Voltage: | AC(100V~240V )/ frequency(50~60Hz) | Beam Angle: | 100° | |
| Color Rendering Index: | Ra>80 | |||
| Power Factor(PF): | > 0.97 | Color Temperature: | 2700K~7000K | |
| Efficiency of the Power Supply: | >90% | Life Span: | >35000Hr | |
| Luminous Efficiency: | 80-100lm/W | Net Weight(kg): | 8.3 | |
| Initial luminous Flux: | 6400-8000lm | (MOQ pcs): | 100 | |
| Item No.: | SW-400HBL100W-Ex | |||
| LED Power: | 100W | Ex-marking | ExnRⅡT4Gc | |
| Work Voltage: | AC(100V~240V )/ frequency(50~60Hz) | Beam Angle: | 100° | |
| Color Rendering Index: | Ra>80 | |||
| Power Factor(PF): | > 0.97 | Color Temperature: | 2700K~7000K | |
| Efficiency of the Power Supply: | >90% | Life Span: | >35000Hr | |
| Luminous Efficiency: | 80-100lm/W | Net Weight(kg): | 10.5 | |
| Initial luminous Flux: | 8000-10000lm | (MOQ pcs): | 100 | |
| Item No.: | SW-400HBL120W-Ex | |||
| LED Power: | 120W | Ex-marking | ExnRⅡT4Gc | |
| Work Voltage: | AC(100V~240V )/ frequency(50~60Hz) | Beam Angle: | 100° | |
| Color Rendering Index: | Ra>80 | |||
| Power Factor(PF): | > 0.97 | Color Temperature: | 2700K~7000K | |
| Efficiency of the Power Supply: | >90% | Life Span: | >35000Hr | |
| Luminous Efficiency: | 80-100lm/W | Net Weight(kg): | 10.5 | |
| Initial luminous Flux: | 9600-12000lm | (MOQ pcs): | 100 | |
| Item No.: | SW-400HBL150W-Ex | |||
| LED Power: | 150W | Ex-marking | ExnRⅡT4Gc | |
| Work Voltage: | AC(100V~240V )/ frequency(50~60Hz) | Beam Angle: | 100° | |
| Color Rendering Index: | Ra>80 | |||
| Power Factor(PF): | > 0.97 | Color Temperature: | 2700K~7000K | |
| Efficiency of the Power Supply: | >92% | Life Span: | >35000Hr | |
| Luminous Efficiency: | 80-100lm/W | Net Weight(kg): | 12 | |
| Initial luminous Flux: | 12000-15000lm | (MOQ pcs): | 100 | |
| Item No.: | SW-400HBL200W-Ex | |||
| LED Power: | 200W | Ex-marking | ExnRⅡT4Gc | |
| Work Voltage: | AC(100V~240V )/ frequency(50~60Hz) | Beam Angle: | 100° | |
| Color Rendering Index: | Ra>80 | |||
| Power Factor(PF): | > 0.97 | Color Temperature: | 2700K~7000K | |
| Efficiency of the Power Supply: | >92% | Life Span: | >35000Hr | |
| Luminous Efficiency: | 80-100lm/W | Net Weight(kg): | 13.5 | |
| Initial luminous Flux: | 16000-20000lm | (MOQ pcs): | 100 | |
Diagram of degradation for Luminous
Photomatric Data
Illumination Distance/illuminance/Irradiated Area
80W
100w
120W
150W
2200w
PackingPacking
Using and installation instructions
Illumination Distance/illuminance/Irradiated Area
80W
100w
120W
150W
2200w
PackingPacking
Using and installation instructions
1,Please firstly install the reflector properly on the heat sink, and screw down.
2,Then screw down the hoop into the top cap.
3, Hang the body lamp on the installation site.
4, Please hang the chaining steel wire on another installation device.
5, Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.
2,Then screw down the hoop into the top cap.
3, Hang the body lamp on the installation site.
4, Please hang the chaining steel wire on another installation device.
5, Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.
Attentions:
1.A licensed electrician must undertake this installation. Please check the lamp carefully before installation,Forbidden to open the lid when charged;
2.Please follow up the installation procedures, make sure the screws been wrested very tightly, the wires been connected properly, as attached installation instruction.
1.A licensed electrician must undertake this installation. Please check the lamp carefully before installation,Forbidden to open the lid when charged;
2.Please follow up the installation procedures, make sure the screws been wrested very tightly, the wires been connected properly, as attached installation instruction.
