Introduction to DH2.0*4.5 SELL Three Drum Dryer From Professional Manufacturer:
It is used to dry ore slag, flyash, quartz sand, etc, the size should be below 20mm.
The DH2.0*4.5Three drum dryershell is self-insulation, thermal efficiency up to 80%(single drum dryer is only 35), the production increase 100%.
The whole shell length is shorter than the single drum 60%, it is good for the technology layout, reduce the factory area, and reduce the foundation investment.
It is high efficiency, outside of the cylinder is 60 degree, the discharging temperature is lower than 60 degree. The outlet temperature is low, ehich can increase the dust collector equipment llife.
Main technical parameter of DH2.0*4.5 SELL Three Drum Dryer From Professional Manufacturer:
The whole shell length is shorter than the single drum 60%, it is good for the technology layout, reduce the factory area, and reduce the foundation investment.
It is high efficiency, outside of the cylinder is 60 degree, the discharging temperature is lower than 60 degree. The outlet temperature is low, ehich can increase the dust collector equipment llife.
Advantages of DH2.0*4.5 SELL Three Drum Dryer From Professional Manufacturer:
1.Three drum dryer use telescope-feed structure, dry the material quickly.
2.Simple design, self-insulation, improve the heat efficiency to exceed 80%.
3.Structure delicate, stable operation.
4.gooddryingperformance, coal consumption <8kg when drying 1 ton material.
5.The fuel can be coal, oil, natural gas etc, dry mass, granule and powder material.
6.Reduceland area for 50% compared to single drum rotary dryer, so constructioninvestment is saved 50%power consumption saved 60%.
7.Finished product moisture can be adjusted depends on requirement of client.
8.Lower outlet tempreture, loonger dust removal using life.
9.Drive by tug not gear.
10.Finished product tempreture lower than 60°C, packing can be done continuously.
Main technical parameter of DH2.0*4.5 SELL Three Drum Dryer From Professional Manufacturer:
Model Specification | Capacity (t/h) | Coal consumption (kg/t) dry material | Power kw | |||
slag | Coal ash | clay | sand | |||
DHø2.0x4 | 5-10 | 4 | 4-7 | 10-15 | 12-14 | 11 |
DHø2.0x4.5 | 12-18 | 6 | 7-10 | 15-25 | 12-14 | 11 |
DHø2.5x5 | 20-30 | 10 | 10-15 | 25-35 | 10-12 | 15 |
DHø2.5x6 | 30-35 | 15 | 15-20 | 35-45 | 10-12 | 15 |
DHø3.0x6 | 35-40 | 20 | 20-23 | 45-55 | 8-10 | 23 |
DHø3.0x7 | 40-45 | 25 | 23-25 | 55-65 | 8-10 | 23 |
DHø3.2x7 | 45-50 | 30 | 25-30 | 65-75 | 6-8 | 30 |
DHø3.2x8 | 50-60 | 35 | 30-35 | 75-85 | 6-8 | 30 |
DHø3.6x8 | 60-70 | 40 | 35-40 | 85-95 | 6-8 | 46 |
