Guillotine type blade beam, with rake angle adjustableThe rake angle could be motorized adjusted by press button according to material and thickness.When shearing thin thickness sheet, the rake angle could be reduced, thus the distortion of the product and the burr could be minimized.Exchangeable Rectangle blade, with 4 cutting edges available.
The cutting beam is guided between roller guides. At the rear of the cutting beam there are two sets of upper and lower roller guides located at each end of the beam.Two spring-loaded rollers located at the front of the shear apply pressure to the cutting beam, forcing it against the back roller guides.
The bearings of the upper roller guides at the back of the cutting beam are mounted on an eccentric shaft. Rotating this shaft causes the cutting beam to tilt, thus providing proper blade clearance to the shearing blades.The upper cutting beam inclined forward, with high section-cutting quality on the product.The blades clearance could be adjusted manually through hand-wheel according to material and thickness.
Cost-effective Guillotine shearing machine
The cutting beam is guided between roller guides. At the rear of the cutting beam there are two sets of upper and lower roller guides located at each end of the beam.Two spring-loaded rollers located at the front of the shear apply pressure to the cutting beam, forcing it against the back roller guides.
cutting width: 30-300mm,
cutting length: 1-999999mm,
length accuracy: ± 0.02mm,
shear thickness: 0.23-0.6mm,
shear burr ≤ 0.03mm.
The price: 85, 000 Yuan.
cutting length: 1-999999mm,
length accuracy: ± 0.02mm,
shear thickness: 0.23-0.6mm,
shear burr ≤ 0.03mm.
The price: 85, 000 Yuan.
The bearings of the upper roller guides at the back of the cutting beam are mounted on an eccentric shaft. Rotating this shaft causes the cutting beam to tilt, thus providing proper blade clearance to the shearing blades.The upper cutting beam inclined forward, with high section-cutting quality on the product.The blades clearance could be adjusted manually through hand-wheel according to material and thickness.
Cost-effective Guillotine shearing machine
This series machine is called angle variable cutting machine,can cut rectangle,trapezoid,right-angle pius bevel,fish-head,parallelogram,five kind strips.
Horizontal shear machine are used for the metal steel coil unwinding, school level, cut to length, cut into the flat sheet of required length and stacking. Applicable to the processing of cold-rolled and hot rolled carbon steel, silicon steel, tinplate, stainless steel and various types of metal materials in surface coating.
The horizontal shear machine production line is composed of feeding car, uncoiler, leveler, feeder, shears, conveyors, stacking devices, the production line can configure a slitting machine, cutting sheet metal into the width needed and then stacking.
Horizontal shear machine classification: horizontal shearing machine, also known as cross-cut line, Kaiping machine, opening screen line, transverse shear unit; according to the device speed is divided into: stop shear, high-speed shear, flying shear.
Horizontal shear machine are used for the metal steel coil unwinding, school level, cut to length, cut into the flat sheet of required length and stacking. Applicable to the processing of cold-rolled and hot rolled carbon steel, silicon steel, tinplate, stainless steel and various types of metal materials in surface coating.
The horizontal shear machine production line is composed of feeding car, uncoiler, leveler, feeder, shears, conveyors, stacking devices, the production line can configure a slitting machine, cutting sheet metal into the width needed and then stacking.
