Specifications
Overflow Ball Mill
1.Wearable barrel body
2.Hollow axi adopts cast steel
3.Lining plate can be replaced
4.ISO9001 certificate
1.Wearable barrel body
2.Hollow axi adopts cast steel
3.Lining plate can be replaced
4.ISO9001 certificate
Application of Overflow Ball Mill
Ball mill is the key grinding equipment after the crushing process. It is widely used in the many industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics. According to the discharging ways of ore, ball mil can also be divided into the grid type and the overflow type.
Overflow Ball Mill Operate Routine
1.Before the ball mills start,check whether erery part of ball mills normal, whether the connecting bolts loose,whether the lubrication of lubrication points normal,whether the driving device reliable,whether protective equipment intact,whether connection of motor carbon fine.
2.Check whether there is barrier surrounding the ball mills. Forbit persons standing near ball mills when it is starting.
3.Press start button to start the motor and notice the change of electric current.The ball mills' continuous starting don't surpass two times and the first starting and the second starting should separate for more than 5 minutes.If it must be thirdly started, it should be check by electrician and fitter before it is started.
4.The ball mill don't start with other equipment at the same time avoiding the high current.
5.Feed water ,feed ore and add steel ball to the ball mill must follow the operate routine.Overload and preoperation are both bad for the ball mill.
6.When the ball mill is running , it should be checked whether the barrel body leak,where the feeding water or ore is normal,where the electric current and voltage is normal.If there is some proble,it should be handled quickly.
2.Check whether there is barrier surrounding the ball mills. Forbit persons standing near ball mills when it is starting.
3.Press start button to start the motor and notice the change of electric current.The ball mills' continuous starting don't surpass two times and the first starting and the second starting should separate for more than 5 minutes.If it must be thirdly started, it should be check by electrician and fitter before it is started.
4.The ball mill don't start with other equipment at the same time avoiding the high current.
5.Feed water ,feed ore and add steel ball to the ball mill must follow the operate routine.Overload and preoperation are both bad for the ball mill.
6.When the ball mill is running , it should be checked whether the barrel body leak,where the feeding water or ore is normal,where the electric current and voltage is normal.If there is some proble,it should be handled quickly.
Main technical parameters of Overflow Ball Mill
Model | Cylinder speed (r/min) | Weight of ball(t) | Input size(mm) | Output size(mm) | Capacity(t/h) | Power (kw) | Weight (t) |
900×1800 | 36~38 | 1.5 | ≤20 | 0.075-0.89 | 0.65-2 | 18.5 | 4.6 |
900×3000 | 36 | 2.7 | ≤20 | 0.075-0.89 | 1.1-3.5 | 22 | 5.6 |
1200×2400 | 36 | 3 | ≤25 | 0.075-0.6 | 1.5-4.8 | 30 | 12 |
1200×3000 | 36 | 3.5 | ≤25 | 0.074-0.4 | 1.6-5 | 37 | 12.8 |
1200×4500 | 32.4 | 5 | ≤25 | 0.074-0.4 | 1.6-5.8 | 55 | 13.8 |
1500×3000 | 29.7 | 7.5 | ≤25 | 0.074-0.4 | 2-5 | 75 | 15.6 |
1500×4500 | 27 | 11 | ≤25 | 0.074-0.4 | 3-6 | 110 | 21 |
1500×5700 | 28 | 12 | ≤25 | 0.074-0.4 | 3.5-6 | 130 | 24.7 |
1830×3000 | 25.4 | 11 | ≤25 | 0.074~0.4 | 4-10 | 130 | 28 |
1830×4500 | 25.4 | 15 | ≤25 | 0.074~0.4 | 4.5-12 | 155 | 32 |
1830×6400 | 24.1 | 21 | ≤25 | 0.074~0.4 | 6.5-15 | 210 | 34 |
1830×7000 | 24.1 | 23 | ≤25 | 0.074~0.4 | 7.5-17 | 245 | 36 |
2100×3000 | 23.7 | 15 | ≤25 | 0.074-0.4 | 6.5-36 | 155 | 42 |
2100×4500 | 23.7 | 24 | ≤25 | 0.074-0.4 | 8-43 | 245 | 42 |
2100×7000 | 23.7 | 26 | ≤25 | 0.074-0.4 | 8-48 | 280 | 50 |
2200×4500 | 21.5 | 27 | ≤25 | 0.074-0.4 | 9-45 | 280 | 45.5 |
2200×6500 | 21.7 | 35 | ≤25 | 0.074~0.4 | 14-26 | 380 | 52.8 |
2200×7000 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-28 | 380 | 54 |
2200×7500 | 21.7 | 35 | ≤25 | 0.074~0.4 | 15-30 | 380 | 56 |
2400×3000 | 21 | 23 | ≤25 | 0.074-0.4 | 7-50 | 245 | 54 |
2400×4500 | 21 | 30 | ≤25 | 0.074-0.4 | 8.5-60 | 320 | 65 |
2700×4000 | 20.7 | 40 | ≤25 | 0.074-0.4 | 12-80 | 400 | 94 |
2700×4500 | 20.7 | 48 | ≤25 | 0.074-0.4 | 12-90 | 430 | 102 |
3200×4500 | 18 | 65 | ≤25 | 0.074-0.4 | according | 800 | 137 |