Brief introduction:
The serious of HTP-001 high temperature sputtered film pressure transmitter is can be a medium resistance to high temperature of 120 ℃, wide measuring range, high precision products. Widely used in the need to measure the relative dielectric high temperature gas, liquid pressure situations.
The product structure is a welded the shell of raw materials: 1Cr18Ni9Ti stainless steel sputtering film cores, no type "O" ring seal, from the structure to ensure the product is stable and reliable under high temperature sputtered films Core selection of internationally renowned brands, special programmed transmitter conversion circuit, and through the security certification and CE certification.
Two-wire system circulation output leads nonpolar; three-wire voltage and current output type AC and DC.
Ordering:
Input signal | Connection type | Pressure portthreads | Addition |
A= 4 ~ 2 0 m A B=0 ~ 10V | H=HIRSCHMANNplug I=Aviationplug C=Cableline outlet | Ga=G1/4 thread Gb=G1/2 thread Na=1/2 NPT thread Nb=1/4 NPT thread Ma=M20X1.5 face seal thread Mb=M20X1.5 waterline seal thread U=7/16 -20UNF threads | La=Gauge with LED Lb=Gauge with LED and 2 control points Va=10-30VDC Vb=220VAC / VDC G=Gaugepressure. A=Absolute pressure S=Sealed gauge pressure M=Intrinsically safe explosion-proofExia IICT6 Ua=0.25%F.S Ub=0.5%F.S |
Specification:
Item | Description | |
Pressure range | Within 0.1MPa ~ 200MPa | |
Overload pressure | 2 Times the ratedpressure | |
Damage pressure | 4 Times the ratedpressure | |
Accuracy | 0.25%F.S/ 0.5%F.S | |
Stability | Typical value: 0.25%F.S/Max. value: 0.5%F.S | |
Operationtemperature | -50℃ ~ 120℃ | |
Compensationtemperature | -20℃~120℃ | |
Compatible media | All corrosive mediacompatible with 1Cr18Ni9Ti | |
Electricalproperties | 2- lines: 4~20mA 3- lines: 0~20mA /0~10VDC / 12~30VDC 4- lines: 0~20mA /0~10VDC / 12~30VDC | |
Load resistance | 2- lines: (U-10) / 0.02(Ω) 3- lines and 4-lines : Elec. Current: (U-12) / 0.02(Ω) Voltage:>100KΩ | |
Insulation | >100MΩ at 50V | |
Electricalconnection | Thewater outlet ( five waterproof sealed), shell protection IP68 | |
Shell protection | IP67 | |
Pressure portthreads | M20×1.5,G1/2,G1/4,NPT1/2,NPT1/4,NPT1/2 | |
Form of pressure | G= Gauge pressure/ A= Absolute pressure / S= Sealed gauge pressure | |
Electromagneticcompatibility | Electromagnetic radiation: EN50081-1/-2; Electromagnetic sensitivity: EN50082-2 | |
Dimensions:
Connector type | ||||
Plug | 2 Wires | Cable | 3 Wires | Cable |
1 | Power | Red wire | Power | Red wire |
2 | Output | Blue/Green wire | Power ground | Black wire |
3 | Output | Blue/Green wire | ||
4(E) | Shielded | Yellow wire | Shielded | Yellow wire |
Pressure portconnection threads | |||||
1 | M20X1.5 | 3 | NPT 3/8 | 5 | G 1/4 |
2 | NPT 1/4 | 4 | NPT 1/2 | 6 | G 1/2 |
Form ofsignal output | |
2- LINES | 4- 20mA |
3- LINES | 4- 20 mA; 0-10 mA; 0-20 mA |
0 - 5VDC; 0.5 – 4.5VDC;1 - 5V; 0 - 10V | |
4-LINES | 4- 20 mA; 0-10 mA; 0-20 mA |
0 - 5VDC; 0.5 –4.5VDC; 1 - 5V; 0 - 10V | |
