Specifications
Industrial Sawdust Dryer
1.low cost,
2.low consumption,
3.high capacity,
4.easy operation and maintenance, etc.
1.low cost,
2.low consumption,
3.high capacity,
4.easy operation and maintenance, etc.
Introduction to 3000*25000 sawdust dryer:
Sawdust dryer refers to the process of adding wet sawdust of powder and particle shape continuously to dry tube though spiral conveyor. In the transportation and dispersion of heat flow, making the humidity of wet materials evaporate, to get dry products of powder or particle shape. It is mainly made up by air heater, feeder, air dry tube, cyclone separator and fan etc.
Use range of dehongsawdust dryer:
Gasflow type sawdust dryer widely used in straw press briquettes fuel,charcoal machinery, wood chip granule fuel, sawdust press blocks,farming and animal husbandry engineering industry. Such as corn strawdrying, soybean straw drying, cotton straw drying, wheat straw drying,sorghum straw drying, wood chips drying, wood shaving drying, sawdustdrying, ginkgo leaf drying, mulberry leaves drying and the agriculturalcellulosic-based material's drying. etc.
The characteristics of 3000*25000 sawdust dryer
1. Strong dry intensity, as the materials is highly decentralized in the airstream, all of the surface area of particles is extremely dry as effective area
2. Short drying time
3. Simple air dryer and small area coverage, easy to build and repair
4. Large capacity and high thermal efficiency, when drying combine water, the thermal efficiency can reach 60%
Working principle of 3000*25000 sawdust dryer :
Regarding TDS-I and TDS-II type dryer (with one stove), it is suitable to process materials which moisture content between 20 to 25%
It can reduce the MS to 8 to 12% one drying time
Regarding TDS-III (with two stoves), it is suitable to process materials which moisture content between 35 to 50%
It can reduce the humidity to 8 to 12% one drying time
That means it can reduce approximately 30% for one drying time
But if the humidity of materials is lower than 35%, the capacity will be increased with less of fuel
All of round places can be adjusted to any angle of 360 centigrade degree according to operation request
Clients can change the angle of dryers base on the production field
Main technical parameter
Type (mm) | Gradient (°) | rotation speed(r/min) | input temperature (ºC) | motor power (kw) | output(t/h) | Weight (t) |
Φ3000×25000 | 3-5 | 1.5-5 | ≤800 | 75 | 32-45 | 104.9 |
