QTJ4-40Zblock machine specification :
block Size(mm) | forming blocks (pcs) | molding cycle | Capacity/8hours |
390×190×190 | 4 | 35-40 | 3200-3600 |
390×240×190 | 3 | 35-40 | 2400-2700 |
240 ×115×53 | 26 | 35-40 | 20800-23400 |
Production conditions:
1.A machine work to be a flat workplace;wooden pallets 500-800 express(850*550*40mm)wood pallets must be kept smooth and the positive highly consistent.
2.Raw material requirements:gravel,particle size not greater than 10mm,needly-like,flaky particles not than 15%,including debris,soil,stone and not more than 2% of the weight.
3.Block conservation:when(the outdoor temperature is 20°c-30°c),the nature conservancy in shape after 3-4hours,you can cover water conservation,24-hour maintenance can turn the heap.Two days later,when the temperature is too low,you can turn the heap curing,curing time 7days.Sunny days water every two hours to pay once,watering at least 1-2times a night;paul maintained block wet winter in addition to water,but also cover,in order to avoid frozen;turn pile,stacking is to gently.so as not to break something.
Principles and characteristics of the structure
1. QTJ4-40Z semi-automatic block machine is fixed, table-vibrating, build expect feeding, automatic feeding stalls, automatic molding, mechanical stripping, advanced and reasonable design of the models for a wide range of used gear, brake solenoid around the ejection
2.The machine uses 4 column positioning accuracy, balance and stability mold to improve the density of block, block the appearance of good, small flash. Spread use of automatic feed worm gear, drive on the key of the mold, spread a material balance sheet in place,saving labor and time.
3. Easy to change the mold, simple to operate, easy maintenance.
4. Electrical control part of the structure is simple, easy to operate; the operator can quickly familiar with.
1. QTJ4-40Z semi-automatic block machine is fixed, table-vibrating, build expect feeding, automatic feeding stalls, automatic molding, mechanical stripping, advanced and reasonable design of the models for a wide range of used gear, brake solenoid around the ejection
2.The machine uses 4 column positioning accuracy, balance and stability mold to improve the density of block, block the appearance of good, small flash. Spread use of automatic feed worm gear, drive on the key of the mold, spread a material balance sheet in place,saving labor and time.
3. Easy to change the mold, simple to operate, easy maintenance.
4. Electrical control part of the structure is simple, easy to operate; the operator can quickly familiar with.
any more question for semi automatic blcok making machine,please contact me.
