First, the technical parameters
Technical Specifications Unit: XD-1030
Nominal force: 1000kN
Table length: 3000mm
Distance between uprights: 2550mm
Throat depth :400-410mm
Stroke of the worktable (slider) :100-103mm
Maximum opening height :370-375mm
Maximum die height :250-255 mm
Close to the speed :/ s37-47 mm
The following table travel speed bending speed :7.5-9 .2
Return speed :47-66
Fuel tank of a number: 3
Main motor power: 7.5 kW
Machine precision slider Repeatability: ≤ ± 0.01mm
Slider positioning accuracy: ≤ ± 0.02mm
Repeat the backgauge positioning accuracy: ≤ ± 0.02mm
Work straightness: 0.15/mmm
Machine weight: 6500kg
Machine Dimensions (L * W * H): 3410 * 1560 * 2300mm
Fuel tank capacity: 70 L
Technical Specifications Unit: XD-1030
Nominal force: 1000kN
Table length: 3000mm
Distance between uprights: 2550mm
Throat depth :400-410mm
Stroke of the worktable (slider) :100-103mm
Maximum opening height :370-375mm
Maximum die height :250-255 mm
Close to the speed :/ s37-47 mm
The following table travel speed bending speed :7.5-9 .2
Return speed :47-66
Fuel tank of a number: 3
Main motor power: 7.5 kW
Machine precision slider Repeatability: ≤ ± 0.01mm
Slider positioning accuracy: ≤ ± 0.02mm
Repeat the backgauge positioning accuracy: ≤ ± 0.02mm
Work straightness: 0.15/mmm
Machine weight: 6500kg
Machine Dimensions (L * W * H): 3410 * 1560 * 2300mm
Fuel tank capacity: 70 L
Second, Features
1, under the drive of the hydraulic, with safety, operability and reliability.
2, rigid mechanical synchronization, rolling guide to keep on working under the table balance.
3, on the bench with oblique Figure deflection compensation device to improve the machining accuracy.
4, the upper and lower mold with the overall quenching on modular forms for the standard model, under the model with dual-slot mode, the middle plate with Quick clamping device.
5, the backgauge feet with scale display, the adjustment is convenient, flexible, high precision.
6, the oil of the hydraulic device to simplify, no oil, maintenance, convenient point inspection.
7, using the foot switch can be arbitrarily controlled by the table, or make stops in the middle on the line bending easy and convenient.
8, the control system uses a professional CNC system NC9 or the NC10 ', with a touch-by-wire steering wheel, electronic hand wheel control fine-tune the upper and lower die exit line and block material fine-tuning.
Third, product characterization
Key Features introduced
1, hydraulic system pressure pressure loop is very simplified, to avoid oil spills occur, maintenance, maintenance is also very convenient.
2, the hydraulic master cylinder hydraulic master cylinder set up the central axis machine, the pressure up and down the machine (table) distortion rate is suppressed at the minimum, so high precision machining.3, the central axis of the lower part the countertops lower part of the machine department equipped with roller guide moving accessories, roller guide action accessories both strong sliding surface and up and down movement along the hydraulic master cylinder surface on both sides, up and down the table parallelism is correctly maintained.
4, the lower limit of the device lower limit device is to enhance the operating efficiency of the device, the lower part of the table can be a simple trip to do the necessary minimum set.Secondly, the bending angle of the workpiece can be a simple dial operation to stage of change also have the ceiling installations.
5 foot rod according to the step increase or decrease in the foot lever, we can control the lower part of the table speed, or make stops in the middle to facilitate the bending of the line.
6, mold installation and center correction by the middle of the upper table plate and the lower part of the table of the lower die, you can simple mold installation, correction center.
7,CNC operations professional touch screen with electronic hand wheel control and product programming, simple and fast.
Fourth, product advantages and disadvantages compared
1, transmission mode drive the fuel tank at the bottom (middle one the main fuel tanks, each side of an auxiliary fuel tank, a total of three fuel tanks) better to ensure the straightness of the workpiece, angle, and easy maintenance.On the drive cylinder in the machine on both sides) in the upper (two fuel tanks and maintenance inconvenient
2, the hydraulic mode transmission in one direction (up) the failure is low, the equilibrium point against the mechanical block.On transmission in both directions (up, down) the equilibrium point jitter, high failure rate
3,Mechanical installation under the transmission does not require a basis to save time, reduce the transmission cost to do basic
4,Narrow countertops under the drive to adapt to a multi-angle bend
