PC Series Hammer Crusher Characteristics:
The hammer crusher use the force of impact between high-speed rotation of the hammer and the material to crushing material. It has the characteristic of simple structure, large crushing ratio, high production efficiency and so on. Can be used for dry and wet crusher, Hammer crusher crushing various mid-hard and abrasive weak materials. The compressive strength of the material does not exceed 100MPa, moisture content Less than 15%. Crusher material can be coal, salt, chalk, gypsum, brick, limestone, etc, also can be used to broken fibers structure, flexibility and strong toughness of broken wood, paper or broken asbestos cement waste to recycling asbestos fiber, and so on. In addition, Hammer crusher not only for the crushing production line, sand production line, but also replacement cone crusher in mineral production line.
Working Principle of PC Series Hammer Crusher:
The main working part of Zhengzhou Toone PC series Hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed inlet and impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further crushing until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirements.
.jpg)
