Automatic wear magnetic stripe line instructions
Production equipment
1.To wear magnetic stripe automatically
2.Development of the machine
3.Working the case of Taiwan
Production process
45 ° PVC strips——The magnetic stripe import PVC strips frontend——Wear cylinder stroke switch under pressure——Rapid penetration ofPVC strip magnetic stripe magnetic stripe cavity
Pressure to wear high-pressure cylinder valve shall not exceed 0.15MPa
Touch screen instructions
1. Chinese language interface of the touch screen.
2. Set length (head length) can be set according to the desired length.Instructions
1. 45 ° angle to the cutting line of the PVC strips on the workingtext table, Hand wear strip magnetic stripe cavity into the machinefront end protruding magnetic stripe, Hand to promote forward slightlywhile travel switch signals, Wear cylinder under pressure at the sametime, Documented motor action,Rapid penetration of 45 ° cutting angle ofthe magnetic stripe of a certain length PVC strips of magnetic stripecavity, Thus the end of one cycle of operation.Sub-cycle.
2. Connect the pressure of the trip switch rod strip show no liftmotor in low-speed operation,When the the Exhibition strips the magneticstripe tension rod lift motor fast running.
3. Pressure
Gas source filter valve at a total pressure of 0.4MPa
CTJ-02 Fully Automatic Wear Magnetic PVC Stripe Line
