IK Series
- Excellent performance for applications with high interference levels
- Designed for single or two-phase applications
- Wide current range
- For small to medium sized industrial equipment, power converters and variable speed motors
- Touch safe terminals on the 6 to 60A product provide easy connections and prevent inadvertent contact for safety in the most demanding applications
Ordering Information
Available Part Numbers
1IK1C | 6IK1 |
16IK10 | 35IK10 |
50IK10 | 80IK10 |
Specifications
Maximum leakagecurrent, each Line to Ground: | |||||
1IK1C | 6IK1 | 16, 35 & 50IK10 | 80IK10 | ||
@120 VAC 60 Hz: | 0.6 mA | 0.6 mA | 1.7 mA | 5.2 mA | |
@289 VAC 50 Hz | 1.2 mA | - | - | - | |
@277 VAC 50 Hz: | - | 1.15 mA | 3.2 mA | 9.9 mA | |
Hipot rating (oneminute): | |||||
Line to Ground | 2250 VDC | ||||
Line to Line | 1450 VDC | ||||
Operating Frequency: | 50 / 60 Hz | ||||
Rated voltage(max.): | 1IK1C | 6 to 80IK | |||
Line to Ground | 289 VAC | 500 VAC | |||
Line to Line | 277 VAC | 480 VAC | |||
Rated Current: | 1 to 80A | ||||
Operating Ambient Temperature Range(at rated current Ir): | |||||
-10°C to +40°C | |||||
In an ambienttemperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io = Ir √(85-Ta)/45 | |||||
Electrical Schematic
Note 1: 1IK1C Only
Note 2: 6IK1 Only
Case Dimensions
Note 1: 1IK1C Only
Note 2: 6IK1 Only
Case Dimensions
Part No. | A | B | C | D | E | F |
(max.) | (max.) | (max.) | ±.015 | (max.) | (max.) | |
± .38 | ||||||
1IK1C | 3.85 | 2.07 | 1.53 | 2.93 | 3.35 | - |
97.8 | 52.6 | 38.9 | 74.4 | 85.1 | ||
6IK1 | 4.69 | 2.27 | 1.8 | 4.063 | 4.47 | - |
119.1 | 57.7 | 45.7 | 103.2 | 113.5 | ||
16IK10 | 6.28 | 1.97 | 4.76 | 5.90 | 5.35 | 6.34 |
159.5 | 50.0 | 121.0 | 150.0 | 136.0 | 161.0 | |
35IK10 | 6.48 | 1.97 | 4.76 | 5.90 | 5.35 | 6.34 |
164.5 | 50.0 | 121.0 | 150.0 | 136.0 | 161.0 | |
50IK10 80IK10 | 9.45 | 3.94 | 3.54 | 6.89 | 6.3 | 7.48 |
240.0 | 100.0 | 90.0 | 175.0 | 160.0 | 190.0 | |
Case Styles
1IK1C
6IK1
1IK1C
Typical Dimensions: | ||
Line/Load Terminals(4): | .250 [6.3] with .07 [1.8] Dia. hole | |
Ground Terminal(1): | .250 [6.3] with .07 x .16 [1.8 x 3.8] slot | |
Mounting Holes (2): | .188 [4.75] Dia. | |
6IK1
Typical Dimensions: | ||
Line/Load Terminals(4): | .250 [6.3] with .07 [1.8] Dia. hole | |
Ground Terminal(1): | .250 [6.3] with .07 x .16 [1.8 x 3.8] slot | |
Mounting Holes (2): | .188 [4.75] Dia. | |
16 & 35IK10
Typical Dimensions: | ||
Input Terminals(3): | DIN type terminal block | |
Output Wire Leads (2): | 7.0 [180.0] min. | |
Mounting Holes (4): | .216 [5.5] Dia. | |
50 & 80IK10
Typical Dimensions: | ||
Line/Load Terminals(4): | DIN type terminal block | |
Ground terminals (2): | 1/4-20 screw | |
Mounting Holes (4): | .260 [6.5] Dia. | |
