Nichrome Mesh
Heanjia Super-metals Co., Ltd. supplies Nichrome Mesh. Nichrome Mesh has good deformation ability, thermal stability, mechanical character, shockproof ability in thermal state and anti-oxidization. Nichrome Mesh is highly recommended for resistance heater elements operating at high temperatures or running under cyclic heating and cooling conditions. Nichrome Mesh is widely used in industrial furnaces, industrial and domestic applications, Mesh wound resistors and potentiometers.
Chemical and Physical Properties
Alloy | Chemical composition | Max. Service Temp. (ºC) | Density (g/cm3) | Melting point ( ºC) | Specific heat J/g. | ||
Ni | Cr | Fe | |||||
Cr20Ni80 | Remanent | 20.0-23.0 | ≤1.0 | 1200 | 8.4 | 1400 | 0.44 |
Cr30Ni70 | Remanent | 28.0-31.0 | ≤1.0 | 1250 | 8.1 | 1380 | 0.461 |
Cr15Ni60 | 55.0-61.0 | 15.0-18.0 | Remanent | 1150 | 8.2 | 1390 | 0.494 |
Cr20Ni35 | 34.0-37.0 | 18.0-21.0 | Remanent | 1100 | 7.9 | 1390 | 0.5 |
Cr20Ni30 | 30.0-34.0 | 18.0-21.0 | Remanent | 1100 | 7.9 | 1390 | 0.5 |
Mesh Specification
Wire Mesh | GB/T 5330.1 ; GB/T 17492 ; JB/T 9155 | 0.5-250 mesh/Inch; Thickness: Min0.05mm |
Characteristics
1. Good deformation ability, thermal stability, mechanical character, shockproof ability in thermal state and anti-oxidization
2. Highly recommended for resistance heater elements operating at high temperatures or running under cyclic heating and cooling conditions
3. High resistivity and very good resistance to oxidation at high temperatures
Applications
1. Heating Elements
2. Hot-Mesh Cutter
3. High-Temperatures Uses
4. Igniters
The manufacture of mesh is started with producing wire. The wire production includes: forging, rolling, annealing and drawing. The wire with right material and wire diameter will be produced. Then the warp wires will be put and prepared on the weaving machine, and then start weaving. From wire to mesh, manufacture process is operated with high standard quality control system. There will be quality test for each batch of product, such as test to diameter tolerance, content, mesh aperture, etc.
Packing Process & Transportation
Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.
Transportation: By air or By sea
Other Terms
Minimum Order Quantity | Manufacture Period | Payment Terms | |
100 KG | 10-15 Days (Small Quantity) | 20-40 Days (Mass Quantity) | L/C, T/T, Western Union |
