ndfeb tube magnets epoxy coating
Tube/Bar/Ring/Stick Ø12.0 x Ø6.0 x 25.0 mm N35 epoxy coating Neodymium Magnet
Name: Neodymium Magnet
Grade of epoxy coating neodymium tube magnets: N35-N52, 35H-48H,30SH-45SH,28UH-40UH,28EH-38EH, 28AH-35AH, ETC
Shape: Block, Ring, Disc, Ball, Sheet and so on
Coatings: Passivation, Nickel, Zinc, Tin, Aurum, Copper, Epoxy, Chemical, etc.
Grade of epoxy coating neodymium tube magnets: N35-N52, 35H-48H,30SH-45SH,28UH-40UH,28EH-38EH, 28AH-35AH, ETC
Shape: Block, Ring, Disc, Ball, Sheet and so on
Coatings: Passivation, Nickel, Zinc, Tin, Aurum, Copper, Epoxy, Chemical, etc.
Surface | Coating | Thickness (Microns) | Color | Resistance |
Passivation | 1 | Silver grey | Temporary protection | |
Nickel | Ni+Ni | 10-20 | Silver bright | Excellent to humidity |
Ni+Cu+Ni | ||||
Zinc | Zn | 8-20 | Shining light blue | Good to salt spray |
Cu-Zn | Shining color | Excellent to salt spray | ||
Tin | Ni+Cu+Sn | 15-20 | Silver | Superior to humidity |
Aurum | Ni+Cu+Au | 10-20 | Shining gold | Superior to humidity |
Copper | Ni+Cu | 10-20 | Shining gold color | Temporary treatment |
Epoxy | Ni+Cu+Epoxy | 15-25 | Black, red, grey color | Excellent to climate humidity and salt spray |
Zn+Epoxy | ||||
Chemical | Ni | 10-20 | Silver grey | Excellent to humidity |
Short Lead Time :10-18days
Key Advantages:
Neodymium magnets are the most powerful commercially produced magnets.
NdFeB magnets have a higher Maximum Energy Product, (BH).max, which can easily reach 30 MGOe and even goes up to 52 MGOe.
NdFeB magnets can replace SmCo magnets in most cases, especially where operating temperature is less than 80 degrees Centigrade.
Very high strength.
Relatively low cost.
Compared to Alnico and SmCo magnets, relatively easy to machine.
Common Applications of epoxy coating neodymium tube magnets:
Sensors Linear actuators Microphone assemblies Magnetic separators DC and servo motors Speakers Printers Magnetic hooksComputer rigid disc drives Beam controls Intelligent toys MRI/NMR
Key Advantages:
Neodymium magnets are the most powerful commercially produced magnets.
NdFeB magnets have a higher Maximum Energy Product, (BH).max, which can easily reach 30 MGOe and even goes up to 52 MGOe.
NdFeB magnets can replace SmCo magnets in most cases, especially where operating temperature is less than 80 degrees Centigrade.
Very high strength.
Relatively low cost.
Compared to Alnico and SmCo magnets, relatively easy to machine.
Common Applications of epoxy coating neodymium tube magnets:
Sensors Linear actuators Microphone assemblies Magnetic separators DC and servo motors Speakers Printers Magnetic hooksComputer rigid disc drives Beam controls Intelligent toys MRI/NMR
.jpg)
.jpg)
.jpg)
.gif)
