R-150W/WP waterproof fiber optic illuminator
Metal Halide fiber optic illuminator is widely used for swimming pool, outdoor decoration, connect optic fiber .
Main Funcation:
1. 8 colors and UV protected
2. Color can be selected or auto run
3. Over-heated protection
4. IP Rating: IP43
5 2 years warranty for our fiber optic illuminator
6. with 1pc OSRAM HQT-T 150W/HDL and 1pc PHILIPS CDM-T 150W/942
7.Fuse: 5A
Technical parameters for 150W-WP of light source
| Model | R-150-WP |
| Voltage | 120V/60Hz,230V/50HZ |
| Lamp | HQI-T 150W/HDL or CDM-T 150W/942 |
| Life of lamp | 6000h |
| Max Aperture | dia. 30mm |
| Size(mm) | L335*W328*H190 |
| Light source | LED Bulbs |
| Input Voltage | 120V/230V DC |
| Weight(Kg) | 15/13 |
| LED color | 8 colors |
| Bulbs included | Yes |
| IP Rating | IP43 |
| Warranty | 2 years assurance |
| Weight(kg) | 15/13 |
A. The installation and treating of the fiber optic
1). Cut the fiber to the specified length. The cutting face should be vertical to the fiber and keep clean on the cutting side.
2). Peel off 40-100mm of the protection cover of the fiber optic(If no protection cover, no need to peel off ang fiber optic ), be careful not to hurt the fiber optic itself.
3). polish the fiber optic end to a smooth surface with polish machine and polish wax.
4). Insert the fiber optic into the waterproof Connector , until it meets at the end of the Fiber Ad justing Head, then screw tight the waterproof connector.
5). Insert the whole fiber connector to the Fixing Set, and then screw down the Fixing Screw.
