Introduction
Groupeve Biaxial Geogrid is manufactured from Polypropylene. It is produced through the process of extruding, punching, heating, longitudinal stretching and transverse stretching.
Performance
High tensile strength at both longitudinal and transverse direction
Application
Soft foundation reinforcing for highway, railway, slope protecting projects, landfill sites
Benefits
Improving bearing capacity of foundation
Preventing cracking and subsiding
Convenient to construct, reducing cost and maintaining expense
Dimensions
Item No. | AT | AL | WLR | WTR | tLR | tTR | tJ |
BX15 | 36 | 36 | 3.0 | 3.2 | 0.9 | 0.7 | 2.5 |
BX20 | 36 | 36 | 3.0 | 3.2 | 1.3 | 1.0 | 3.0 |
BX20L | 65 | 65 | 5.6 | 5.5 | 1.2 | 0.9 | 3.5 |
BX25 | 34 | 36 | 2.6 | 2.8 | 1.8 | 1.5 | 4.2 |
BX30 | 34 | 36 | 2.8 | 3.0 | 2.1 | 1.8 | 4.7 |
BX30L | 65 | 65 | 5.6 | 5.5 | 1.6 | 1.2 | 5.0 |
BX40 | 34 | 36 | 4.0 | 4.5 | 2.6 | 1.6 | 5.0 |
BX45 | 34 | 34 | 4.0 | 4.6 | 3.2 | 1.6 | 5.2 |
BX50 | 34 | 36 | 4.0 | 4.5 | 3.0 | 2.0 | 5.8 |
Width:1~4m
Length:50m/roll
Item:BX15;BX20;BX25;BX30;BX35;BX40;BX45;BX50
Groupeve Biaxial Geogrids improve the structural integrity of roadways by confining and distributing load forces. Geogrids provide support for the construction of access roads, highways and applications on weak subgrades that previously required expensive over-excavating and replacing. Geogrids are also used for road construction on stable subgrades to reduce aggregate thickness requirements and/or extend roadway performance life.
