Great Planes Eagle 580 Matt Chapman 85-100cc ARF

Features :

    Great Planes Eagle 580 Matt Chapman 85-100cc ARF GPMA1286
    Construction: Built-up balsa and ply airframe
    Wings: Two-piece wing panels with aluminum joiner tube
    Horizontal Stabilizer: Two-piece with carbon fiber joiner tube
    Radio Compartment: Located under canopy, plywood reinforced
    Covering: Top Flite MonoKote
    Cowl: Fiberglass, painted to match covering
    Cockpit Detail: Dash with gauges
    Pilot Bust: Fiberglass, painted black, white, blue and blue-green
    Canopy: Clear, integrated with hatch, removal allows access to electronics and battery packs
    Landing Gear: Painted fiberglass
    Main Wheels: Treaded rubber 4" (102mm) diameter
    Tailwheel: Treaded rubber 1-1/2" (39mm) diameter
    Wheel Pants: Painted fiberglass
    Aileron Control: Four servo, prehinged with giant scale hinge point hinges
    Fuel Tank: Approximately 40oz (1183cc)
    Spinner: Aluminum 4" (102mm) diameter, painted blue
    Stabilizer: Bolt-on halves with prebuilt servo pockets, carbon fiber tubes
    Aileron Control: Dual Servo, double beveled control surfaces
    Rudder Control: Dual servo, double beveled control surfaces
    Hardware: Complete giant scale set with all-aluminum servo arms (normally an extra-cost add-on)
    Building Time: Ready to fly in 6-8 hours
    Warranty: Great Planes Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at the date of purchase.


Specifications :

    Wingspan: 100" (2540mm)
    Wing Area: 1892 sq in (122 sq dm)
    Weight: 24 - 28lb (10880 - 12700g)
    Wing Loading: 29 - 34 oz/sq ft (88 - 104g/sq dm)
    Length: 96" (2440mm)
    Airfoil: Fully symmetrical
    Center of Gravity: 3-1/2" (89mm) Back from the wing's leading edge measured at the wing tips, NOT THE FUSELAGE
    Control Throws- Low Rate High Rate 3D
    Ailerons: 1-3/8" (35mm) 17° 1-3/4" (44mm) 22° 2" (51mm) 26°
    Elevator: 7/8" (22mm) 7° 1-1/8" (29mm) 10° 4-1/4" (108mm) 38°
    Rudder: 2" (51mm) 10° 3" (76mm) 15° 8" (203mm) 44°


Contents :
Pre-built and covered wing and fuselage sections, spinner, instrument panel, wheel pants, wheels, all hardware including aluminum servo arms and servo tray, pilot bust and manual


Price : USD 649.90 (10 units)

Visit our website for order or more details.