100W Power Dental Sealing Machine

100W Power Dental Sealing Machine/12MM Width Sterilization Bag Sealing Machine

1-Technical data:

Power input	AC110V/230V  50/60Hz
Pre-heating	2~3minutes
Power	100W
Isolation	I/IPX0
Type of sealing	At constant temperature
Sealing length	30cm
Sealing width	12mm
Gross weight	7.5kgs
Package Dimensions (WxLxH)	460*360*170mm
Environmental temperature	+5 / +40 °C
Relative max. humidity	85%
Max voltage variation	± 10 %
Pollution level	1

a.Connect the power cord to the power connector whichis on the back side of the sealer, check if the voltage of your equipmentmatches the voltage of the local electrical network.

c.Place the roll on the holder. The beginning of the rollshall be inserted through the back side, between the pressure bar and thesealing bar always with the paper side down (resistance's side)and the plastic side up (directly under the upper pressurebar). Pull the sealer arm towards the operator and press it down softly until itis locked. Exaggerated pressure may break the sealer arm and this kindof damage is not covered by the warranty. The sealing time (around 4seconds) must be manually controlled by the user. Note: If thesealing temperature is too low or too high the sealing might be inefficient (theenvelopes may be stuck to the sealing area when they are pulled orbe visibly badly-sealed). To correct this, adjust the timer properly. Onceadjusted it is not necessary to perform any other adjustment to continuesealing.

d.To cut the packages, still with the arm locked, slidethe blade from one side to the other, raise the sealer arm and remove theenvelopes.Note: If the blade knob is pulled slowly the papermay crease and the cutting will not be adequate. To make it more precise, pullthe blade knob quickly. If necessary, slide the cutting blade more thanonce.
      

3-Packing details
1peice