EN 10204, heat exchangers, heater tubes, Seamless tube, seamless tubes, U bend tube, U bend tubes
Each U bend tube of our range is rigorously quality checked by our team of talented professionals on every stage of production to deliver the clients defect free best quality products. These U bend tubes can be custom designed in various diameters as per the requirements of our clients.
Available in different specifications, these U bend tubes can be custom designed in various diameters as per the requirements of our clients.
Application:
Application:
- Boilers, heat exchangers, super heaters, condensers
Production Standard, Grade, Steel No:
- ASTM A688/A688M-Welded Austentic Steel Feedwater Heater Tubes.
- ASTM A 312/213/269,DIN 17458/2462,BS3605/1,JIS, ASME SA556 G3429/3459,ISO1129/2037/9329,GB/T14975/14976/13296 and so on.
Material:
- TP304,TP304L,TP316,TP316L,TP321,TP310S,TP347H,TP316Ti,
- Carbon steel
- alloys and so on.
Proces:
- The removal of beads is done as per standard specifications.
- Bead is cold worked.
- It is brought in level with the base metal.
Before heat treatment on tube mill, bead rolling is made in-line.
This will help in recrystallization of weld structure.
The weld structure will also homogenize faster in annealing process.
Length: unbending length or fix length
Mill test certificate: according to EN 10204 3.2
Packing: Wooden cases, bundle or plastic bags, plywood boxes
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
This will help in recrystallization of weld structure.
The weld structure will also homogenize faster in annealing process.
Length: unbending length or fix length
Mill test certificate: according to EN 10204 3.2
Packing: Wooden cases, bundle or plastic bags, plywood boxes
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Features :
- U bending is done by cold working process.
- U bending is done to the required radius as per customer drawings.
- The bend portion and six inch leg is stress relieved by resistance heating.
- Inert gas (Argon) is passed through it at the required flow rate to avoid oxidation in ID.
- The radius is checked for its OD and wall thinning with the recommended specification.
- The physical properties and micro-structure is checked at three different position.
- Visual inspection for waviness and cracks is done with Dye Penetrant Test.
- Each tube is then hydro tested at the recommended pressure to check for leakage.
- Cotton ball test is done to check the ID cleanliness of the tube.
