PHT-1400-G1 include a pneumatic telescoping light mast which can elevate the four metal halide lamps to a height of 20 or 30 feet. This mobile floodlight package is ideal for emergency services, large scale event illumination, construction, mining, industrial operations and anywhere an extended operation capable mobile lighting solution is needed.
The PHT-1400-G1 mobile light tower incorporates a long list of impressive features. The diesel engine is a air cooled that operates at 3000/3600 rpm. This engine features key operated electric starting, a full twelve volt electrical system, automatic low oil pressure and high temperature safety shutoffs, dual fuel filters and easy access oil and radiator drain ports to facilitate maintenance. A 16 Liter fuel tank allows the engine to operate for 12 hours continuously without refueling. The 6,000 watt generator is a single bearing design and produces 220/230 volt current at 50/60 hz.
Lights: The lighting system on this unit is comprised of four 1,000 watt metal halide lamps producing 110,000 lumens of light each attached to the end of the telescoping light boom. These floodlights produce a wide flood light pattern capable of illuminating a minimum of 5 acres with a combined total of 440,000 lumens of light. Each floodlight is securely fastened to the light boom and each lamp includes a support bracket to help maintain lamp stability within its housing. The lamps are connected to the power source via a water tight male pin connector that attaches to a receptacle located on the end of the telescoping boom.
Controls: The operations system for this unit is a cable control panel can control the light tower in a certain distance. And the control panel can control the air compressor working for support the pneumatic telescoping boom.
Pneumatic Telescoping Boom: The telescoping boom consists of three sections extending up to 20/30 feet through the air compressor which mounted in the house. The telescoping boom is constructed of anodized aluminum material to resist rusting and corrosion and is capable of withstanding 80 kmh winds when extended to its full height and the stabilizing outriggers are deployed.
Housing: All of the operating components are housed within a protective compartment constructed of 14 gauge steel and designed to provide airflow for cooling. Side doors provide access to the interior while latches provide secure closing while the unit is in use. The design and construction of this enclosure along with the commercial grade muffler system helps this unit operate at a low 63 Db noise level @ 23 ft. The entire unit is mounted onto a two wheel trailer with a 2,000 lbs leaf spring axle.
