Hitec Optic 6 w/Optima 7 Rx 4 HS-325HB Servos

Features :
- Hitec 158241 Optic 6 w/Optima 7 Rx 4 HS-325HB Servos
- Transmitter;
- AFHSS (Adaptive Frequency Hopping Spread Spectrum) with extremely low latency response
- Power Plane/Sailplane and Helicopter Mixing Capability
- Eight model memory with model naming capability
- Assignable switches
- Spectra compatible
- Revo mix
- Throttle lock and engine cut
- Dual Timer
- CCPM and CROW mixing
- Throttle and pitch curves
- Two open mixes
- End Point Adjustment (EPA)
- Digital trims
- Three flight modes
- Gyro gain
- Dual rates
- Exponential
- Fail safe
- Camber and reflex
- Charge jack
- Trainer jack, requires #58310 Trainer Cord, HRCM8310 (not included)
- Receiver;
- Dual LED status indicator with low battery warning
- SPC (Supplemental Power Connection)
- Telemetry sensor and system port
- Fail safe and hold mode
- Compatible with Transmitters using Hitec AFHSS 2.4 system
- Single BODA (Boosted Omni-Directional Antenna)
- Scan mode selectable

Specifications :
- Servo;
- Speed: 0.19 sec/60° @ 4.8V, 0.15 sec/60° @ 6.0V
- Torque: 42.00 oz-in @ 4.8V, 51.00 oz-in @ 6.0V
- Length: 1.6" (41mm)
- Width: 0.8" (20mm)
- Height: 1.4" (37mm)
- Weight: 1.7oz (48g)
- Receiver:
- Dimensions: 57 x 21 x 11.4mm (2.24 x 0.82 x 0.44")
- Operating Voltage: 4.8-7.4V from receiver battery power or ESC 4.8-35V using SPC function
- Charger;
- Input: 117VAC 50/60Hz 4VA
- Output: Tx 10.8V DC 55mA
- Rx 4.8V DC 55mA

Package Contents :
- Optic 6 Transmitter with Spectra 2.4GHz Module
- Four HS-325HB Servos, HRCM3326
- #57401 4.8V 600mAh 4-cell NiCd flat Receiver Pack
- CG25A AC Charger, HRCP3025
- #58207 8 cell 9.6V 600mAh Transmitter Battery
- Switch Harness, HRCM4405
- 12" (305mm) Extension, HRCM4604
- Flight Preserver Foam Wrap, HRCM8480
- Instruction Manual
- Servo Horns and Mounting Hardware
- Hitec sticker sheets
- Antenna flag set