Productparameters:
Quality / safety certification ISO9001-2000
Technical parameters:
1. Power 220V 50HZ
2.Stamping board area 180 * 100mm
3. Workbench area 440*330mm
4. Maximumpressure 2000kg
5. Vertical stroke 40mm
6. Heating power (depending on thesize of the heating plate)
7. Way of feeding: mechanical drive
Advantages:
1. Pressure strong, stable. theworkbench can pull
2. Stamping pressure, Temperature,transfer time ,adjustable
3. Adjustable mechanical paper feeding andreceiving
4 Adjustable table height, lifting
Packagingparameters
Weight: 120KG
Dimensions: 600 * 700 *820mm
Technical parameters:
1. Power 220V 50HZ
2.Stamping board area 180 * 100mm
3. Workbench area 440*330mm
4. Maximumpressure 2000kg
5. Vertical stroke 40mm
6. Heating power (depending on thesize of the heating plate)
7. Way of feeding: mechanical drive
Advantages:
1. Pressure strong, stable. theworkbench can pull
2. Stamping pressure, Temperature,transfer time ,adjustable
3. Adjustable mechanical paper feeding andreceiving
4 Adjustable table height, lifting
Packagingparameters
Weight: 120KG
Dimensions: 600 * 700 *820mm
ProductDescription:
The stamping machine is on the stamping machine of thebase in the plane, using the principle of the lever, the pressure of the leveracting on the heating plate, so as to achieve the required pressure.
The stamping machine is on the stamping machine of thebase in the plane, using the principle of the lever, the pressure of the leveracting on the heating plate, so as to achieve the required pressure.
The machine applies to orders is not too large bronzingproducts, branded and paste, especially for stores,making greeting cards, handles, invitations and other products stamping,the mechanical stamping paper conveying manually stamping operation, have astrong flexibility.
Stamping process the matters needing attention:
(1). According to the different varieties of scalded object, select the appropriate hot stamping foil. Good sized must master the temperature, pressure, stamping speed three party coordination,
and according to the short-run printing materials, area of difference.
(2). The cutting knife should grasp the direction and speed of car;
(3). The anodized hot stamping foil should choose attributes suitable paper, ink (especially black ink), kerosene, composite glue, hot stamping parts must be kept dry, so as to avoid the bronzing
layer oxidizing or injury;
(4). The general packaging: 0, 64 × 120m volumes, each volume 10: a box can be custom width of 0.64M, length of 240m or 360m rolls or other special specifications;
(5). When stored to prevent pressure, moisture, heat, sunscreen, placed in a cool ventilated place.
Note: Can according to the customer demand manufacturingvarious stamping machines.
