50KV 50W X-ray high voltage power supply

TYPICAL APPLICATIONS:
      X-ray tubes from Kevex Oxford, RTW, Superior, Varian and Trufocus.
OPTIONS:
        BIAS         Bias Supply  
        USB          USB Interface          
        RS232       RS-232 Interface
        RS422       RS-422 Interface
        NAT           ARC,does not shutdown
        AT(X)        ARC, shutdown (option 1-8 arc)
SPECIFICATIONS:
       Input:
             +24Vdc±10% , 5.0A maximum for either 50watts
               or 75 watts .
            +24Vdc±10% , 8.0A maximum for 100 watts units .
        Output:
              See"XRW SELECTION TABLE"
        Voltage Control:
             Local:Internal multi-turn potentiometer to set
voltage from 0 to full output voltage.
             Remote:0 to +10Vdc proportional from 0 to full
             output voltage.Accuracy: ±1%. ZIN: 10Mohm.
Emission Control:
         Local:Internal potentiometer to set beam current
         between 0 and full output current.
         Remote:0 to +10Vdc proportional from 0 to full
         output current. Accuracy : ±1%. ZIN: 10Mohm.
DC Filament Supply:
         Current: 3.5A, adjustable
         Voltage: 5.5V,Preheat
Voltage Regulation:
         Load: 0.01% of output voltage no load to full load.
         Line: ±0.01% for ±10% change in input voltage.
Current Regulation:
         Load: 0.01% of output current from 0 to rated voltage.
         Line: 0.01% of rated current over specified input range.
Ripple:                      
         0.25% p-p of output voltage.     
Temperature Range:
         0°C to +50°C operational.
Temperature Coefficient:
         0.01% per °C, voltage and current regulated.
Stability:
         0.05% per 8 hours after 1/2 hour warm-up.
Voltage and Current Monitors:
         0 to +10Vdc proportional from 0 to rated output.Accuracy±1%.
Dimensions:
         5.51"H x 3.35"W x9.45 ”D
         (140.00mm x 85.00mm x 240.00mm)