FRY is a heat-shrinkable, tubular sleeves which prevent corrosion of welded pipe joints in distribution lines for sizes up to DN1000. This mechanically strong and flexible sleeve is compatible with all standard pipeline coatings and outer jackets.
Construction: Three-layer system
First layer: Liquid epoxy, solvent-free two-component
Second layer: High shear strength copolymer adhesive
Third layer: Radiation cross-linked polyethylene
The FRY heat shrinkable tubular sleeve is mainly applied to provide anticorrosive protection for field welding and insulation mending in buried or aerial. Also it is available to provide sealing and anticorrosive protection for flanged joint and insulated flange.
Features
---High mechanical strength and powerful aging resistance
---Good environment stress cracking resistance
---Excellent adhesion performance
---Convenient to use
---Satisfied with special standard or requirements
Application
---Oil & gas pipelines
---Water pipelines
---Compatible line coating: PE, FBE, Coal Tar
Technical Data
No. | Item | Unit | Test results | Test Method | Conclusion | |
1 | Tensile strength | MPa | 24.6 | GB/T 1040.2/ASTM D638 | Pass | |
2 | Ultimate Elongation | % | 640 | GB/T 1040.2/ASTM D638 | Pass | |
3 | Electric strength | MV/m | 32.3 | GB/T 1408.1/ASTM D149 | Pass | |
4 | Volume Resistivity | Ω·m | 6.05×1013 | GB/T 1410/ASTM D257 | Pass | |
5 | chemical corrosion resistance 10% HCl (7d) 10% NaOH (7d) 10% NaCl (7d) | % % % | 98 98 98 | GB/T23257-2009 Appendix H | Pass | |
6 | Heat Aging(150℃ 21d) (%Elongation) | % | 554 | GB/T 1040.2/ASTM D638 | Pass | |
7 | Heat Shocking (225℃,4h) | - | No cracking, flow, or dripping | GB/T23257-2009 L/ASTM D2671 Appendix L/ASTM D2671 | Pass | |
8 | Impact Resistance | J | >15 | GB/T23257 Appendix k/ ASTM G14 | Pass | |
9 | Softening point of adhesive | ℃ | 115 | GB/T 4507 | Pass | |
10 | Lap Shear Strength | KPa | 2053(23℃) | GB/T 7124/ASTM D1693 | Pass | |
320(70℃) | ||||||
11 | Peel strength | PE/FBE | N/cm | 191(23℃) | Pass | Pass |
24(70℃) | ||||||
PE/PE | 185(23℃) | |||||
23(70℃) | ||||||
PE/Steel | 166(23℃) | |||||
22(70℃) | ||||||
12 | Cathodic Disbondment | mm | 16.5 31.2 | ASTM G42 ASTM G8 | Pass | |
13 | (70℃,120d) Hot-Water Immersion | - | No delamination, blisters,or water under strap | GB/T23257 Appendix N/ASTM B870 | Pass | |
14 | Water Absorption | % | 0.05 | SY/T0447/ASTM B570 | Pass | |
15 | Low-Temperature Flexibility | - | -15℃Min | ASTM D2671 | Pass |
Specification
Specification | Suitable Dia. Of pipeline | specification | Suitable Dia. Of pipeline |
FRYΦ 159*500-1.2/0.8 | Φ159 | FRYΦ 630*500-1.5/0.8 | Φ630 |
FRYΦ 219*500-1.2/0.8 | Φ219 | FRYΦ 720*500-1.5/0.8 | Φ720 |
FRYΦ 273*500-1.2/0.8 | Φ273 | FRYΦ 813*500-1.5/0.8 | Φ813 |
FRYΦ 325*500-1.2/0.8 | Φ325 | FRYΦ 920*500-1.5/0.8 | Φ920 |
FRYΦ 377*500-1.2/0.8 | Φ377 | FRYΦ 1016*500-1.5/0.8 | Φ1016 |
FRYΦ 426*500-1.5/0.8 | Φ426 | FRYΦ 1220*500-1.5/0.8 | Φ1220 |
FRYΦ 529*500-1.5/0.8 | Φ529 | FRYΦ 1350*500-1.5/0.8 | Φ1350 |
The above data is normal size. We can produce certain size of products according to the customers' demand.