ET7133 GPS&GPRS HF Reader
Graphical configuration software
ET7133 RFID Reader provides full graphical software configuration, easy to use, and supports import or export configuration file; so users just simply click a few icons to quickly setup RFID system.
3. Specifications
Basic
- GPRS Dual Bands 900Mhz/ 1800Mhz
- GPRS Quad Bands 850/900/1800/1900Mhz(Optional)
- CDMA 800mhz (Optional)
- Dual SIM Slot (Optional)
- TAGdata buffer
- Smart power management
- Automatic power supply detection
- Li-Battery inside (Optional)
- Support 2 DI pulse input (Optional)
- Support camera to Photograph
- Support alarm link to photograph
- Clocksynchronization
- DOport programmable output
- DI port zone type setting
- Timing, password arm/disarm
- SMS backup tunnel
- PC based configuration tool
- Real time OS, steady system
- Watch dog design, ensure reader alive
- Low consumption, industrial design
- Fully type approved with ETSI GSM Phase 2+standard
- Enhanced EMC/EMI design
GPS
- GPS receiver forsatellite launches 1575.42MHz frequency of the C/A code
- Spread spectrummodulation signal
- TrackingSensitivity:-158dBm
- Positioningaccuracy:<10m
- GPS Channel:24 channels ;
- Warm start:>20S
- Cold start:>150s;
- Maximum updaterate:4HZ
RFID
- Frequency: 13.56MHz
- Compliance with ISO14443 type A non-contactsmart cards; such as Mifare S50, Mifare S70, UltraLight, Mifare_ProX ...
- Built-in antenna
- Read Range: 5 ~ 8cm
- Compatible with other protocol
- Stable read range
- Anti-collision algorithm
GPRS
- Industrial class GPRS wireless module
- Embedded PPP, TCP/IP Stack
- Support main and backup service center
- Support TCP/IP and UDP/IP
- Supports DNS and dynamic data service centerIP address
- Support continually or sleep work mode
- Support Carrier public & special APN
- Remote monitoring and control
Interface
- GPRS Antenna: GPRS 50Ω/SMA Female;
- RFID Antenna: Built-in RFID antenna
- SIM/R-UIM: 3V
- Configuration: RS232
- DI: 3 Ports (0-3V False, 3-36V True)
- AI: 1 Port
- DO: 1 Port
Note: DI = Digital Input
AI = Analog Input
DO = Digital Output
Power
- Voltage: 12V~50VDC
- Default Voltage: DC12V
- Consumption:
Communication:150mA@+12VDC
Idle: 80mA@+12VDC
Others
- Dimension: 116mmx155mmx26mm
- Weight: 370g
- Operation temperature: -45~+75ºC
- Storage temperature: -55~+85ºC
- Relative humidity: 95% (no-condensing)
4.Applications
ET7133 RFID Reader products can be used for many industrial applications, such as:
- Government bus and officer management
- Factory bus and employee management
- School bus student management
- Logistic vehicle
- Policy vehicle
