Techincal Advantages of Bimetallic twin screw barrels for wpc pp/pe plastic pellet making machinery :
1.Advanced Nitriding Technology
2.Anti-corrosion and Wear-resisting Duplex Metal Spraying Technoloy
2.Anti-corrosion and Wear-resisting Duplex Metal Spraying Technoloy
Application:
Used for PVC + 30% CaCo3, recylced plastic material,etc
Advantages
1. Parallel twin screw and barrel has the advantage of lower rotation speed, smaller shear stress between the small screw
2. Good plasticization, high productivity, small shear force, stable pressure , less wear and tear and low cost.
3. Parallel twin-screw and barrel is widely used in PVC products processing, especially for the production of PVC products with the output over 350Kg / h, because the parallel twin-screw and barrel costs less than conical twin-screw and barrel while it has more mature technology.
4. Parallel twin-screw and barrel is successfully applied in PVC plate, pipe, profile, pellet and mould, at the same time, it solved the technical problem of low foaming, high foaming, high filling, wear and corrosion.
Processing:
co-rotating Bimetallic twin screw barrels for wpc pp/pe plastic pellet making machinery | |||
Diameter | Φ15mm-Φ350mm | Designing | Screw structure and compression ratio can be designed according to different products & different output requirement. |
Materials | 38CrMoAlA (JIS SACM645) SKD61 | Application | PVC plate, pipe, profile, pellet and mould, at the same time, it solved the technical problem of low foaming, high foaming, high filling, wear and corrosion. |
Nitride Case Depth | 0.5mm-0.8mm | Technology | 1)Longer time Gas Nitriding treatment 2)special anti-wear & abrasion alloy (bimetallic) 3)tungsten carbide 4)cobalt base alloy 5)stainless steel 6)Gh113 nickel based alloy |
Nitride Hardness | 950-1020HV | Packing | Wrapped up by film in wooden |
Nitride Brittleness | ≤Grade One | Payment Term | T/T , L/C |
Surface Roughness | Ra0.4um | Delivery Term | 25 working days |
Screw Straightness | 0.015mm | Port Departure | Shanghai/Ningbo |
Alloy Hardness | HRC58-62 | Min. Order | 1 set |
Alloy Depth | 0.5mm-0.8mm |
Processing: